[TRNSYS-users] Switching Printing and Plotting devices on and off

[David BRADLEY]

Jean,
   For a Type65 plotter, you can change the 9th parameter (shut off 
online without removing) to a value of -1, in which case the online will 
be deactivated but does not need to be removed from the simulation.  
Unfortunately, there is not an equivalent parameter for other printing 
devices (Type46, or Type15). You might have to save a copy of the *.tpf, 
delete the printer, run the simulation, then go back to your saved copy 
(not ideal, I realize)
Best,
  David

On 2/28/2012 07:49, Jean Marais wrote:
> Dear Group,
> What is the easiest way to switch a printing or plotting device on or off?
> - breaking the link? --> requires tedious reassigning for reconnection
> - other?
> Regards,
> Jean
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120301/6736695c/attachment-0001.htm>