[TRNSYS-users] Type9 and Type16 coupling

[David BRADLEY]

Antoine,
   I believe that this problem is fixed in the Trnsys17.1 update, which 
should be available to you from CSTB
Best,
  David


On 6/27/2012 06:32, Antoine Gautier wrote:
>
> Dear Trnsys users
>
> I really cannot find out what is wrong with the attached project.
>
> Simulation fails if started at any time but 0 due to inconsistency 
> between current time step and current interpolation interval in Type16.
>
> However when I trace Type9, the interval boundaries (outputs 99 and 
> 100) do actually bound the current time step at any time !
>
> Help on this reluctant issue would be much appreciated.
>
> Thanks a lot
>
> --
>
> Antoine Gautier
> SolamenSAS
> +33 6 58 24 02 60
>
> antoine.gautier at solamen.fr <mailto:antoine.gautier at solamen.fr>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120628/2531a1a1/attachment-0005.htm>