[TRNSYS-users] Problems with 3d wizard

[David BRADLEY]

Ricardo,
   There is a step in the middle I think. Once you have completed your 
project in Trnsys3D, you save the *.idf. Jeremiah is correct that this 
file uses the EnergyPlus file format so it has to be translated to the 
TRNSYS format. The next step is to open TRNBuild and import the *.idf, 
make any changes you want to the building materials, etc., then save the 
file in native TRNSYS format (*.bui). Only then can you go on to the 
TRNSYS studio and reference the *.bui file.
Regards,
  David


On 6/24/2012 15:46, Ricardo Gallegos wrote:
> Hi all
> Following the tutorial for trnsys3d, i get to the step that trnsys 
> asks for a idf file. I did save as idf my trnsys3d project, but I got 
> a message that  the program cant find a BUI file. What is the problem?
> Thasnk you for your advice.
> Ricardo
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120625/fd125246/attachment-0005.htm>