[TRNSYS-users] again type 94

David BRADLEY d.bradley at tess-inc.com
Mon Jun 18 08:34:03 PDT 2012


Jörn,
If parameter 16 is set to a positive value between 0 and 1, then it sets 
tau-alpha for all angles of incidence. If parameter 16 is set to a 
negative number, the incidence angle modifier routine inside Type94 will 
be enabled and the absolute value of parameter 16 sets the magnitude of 
tau-alpha at a normal angle of incidence (according to the "More" button 
for parameter 16 of Type94).
Best,
  david



On 6/15/2012 06:44, von Grabe, Jörn wrote:
>
> Dear all!
>
> Is it true that par16 (tau-alpha) is only used for the thermal model 
> to calculate the cell temperature? This is how I read the source code. 
> If I change the parameter to e.g. 0.1 the array power is not changed 
> (while setting par7 and 8 to zero). Isn't there an IA dependence of 
> the cell power?
>
> Thank you for your help
>
> Jörn
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120618/f9b23eaf/attachment-0005.htm>


More information about the TRNSYS-users mailing list