[TRNSYS-users] Type 65 problems results

[David BRADLEY]

Sara,
  Type65 is just a plotter. If it is showing you no difference between 
your two zones first make sure that you are plotting what you think you 
are plotting. Then start looking at the controls to make sure that the 
zones are indeed different. Type65 does have the ability to produce an 
output file as well as the graphical plot. If you are seeing differences 
between the two zones' results online but not in the files then make 
sure that each of your Type65s have a different output file name; if 
both Type65s are writing to the same file, the results are going to be 
impossible to compare.
Kind regards,
  david


On 6/14/2012 22:55, Guilbert Sara wrote:
>
> Hi trnsys users,
>
>
> i use Type 65, type 88, type 112
>
>
> I want to explore the behavior of two rooms with air conditioning.
>
> I have two cooling set point temperatures for the two rooms (type 88). 
> One is 24 °C, the other is 26°C the both has a fan to regulate the 
> temperature. The point is, I use the type 65 for the results, and even 
> if I have two different set point temperature, the results are the 
> same, the temperature in the two rooms is the same, and the both rooms 
> follow the 26°C set point temperature.
>
>
> Why ? do you have any ideas ?
>
>
>
> Sara Guilbert
>
> CETHIL LYON FRANCE
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120618/549b1c13/attachment-0005.htm>