[TRNSYS-users] Transferring aTrnsys3d Sketch Up to Transys

[Damien Gondre]

Nicholas,

Regarding the first error message, it is a problem of unmatching surfaces.

When you drew your different thermal zones with the Trnsys3d wizard in
SketchUp you probably used at the end the surface matching button.
This button calls for a function which scans all the surfaces included in
your project and affects a construction type (for instance ground floor,
ext_wall, adj_wall, …). In case of adjacent walls the outside boundary
condition (you can see this property in Trnsys3d > Object info when right
clicking on a surface) must be “zone”, and the Outside boundary object must
be another zone name. The surface matching button works pretty well as long
as surfaces match exactly. But when one wall of zone A is simultaneously
adjacent to one wall of zones B and C then you have to manually split the
wall of zone A into two walls respectively adjacent only to zone B and only
to zone C. Otherwise the adjacent wall won’t be automatically addressed
when using the surface matching button. That is probably what happened in
your project.

You must then re-open your *.idf file in SketchUp and check all surfaces of
zones reported in the error message with the object info window to see if
an adjacent surface is defined for each surface of the zones. This is
probably not the case.

I would say the second error message might be a logical consequence of the
first one.
I can't properly read the third one (the resolution is too low) but if you
fix the first problem it might also fixed also the last one…?


Regards,

Damien Gondre.
---------------------------------------
Centre de thermique de Lyon (CETHIL)
UMR 5008 - Insa de Lyon, UCBL, CNRS
Bâtiment Sadi Carnot
69621 Villeurbanne Cedex
France
+334 72 43 84 68




On Wed, Jun 13, 2012 at 8:50 PM, Nicholas Dumoulin <
nicholas.dumoulin at ontariosd.ca> wrote:

> Hello Everyone,
>
> So I am working on a 2 zoned Transys House in Google Sketch up and when I
> try to import it into Simulation Studio using the 3D Building Project
> Wizard the following happens.
>
> I go to open the IDF file I generated in sketch up and the attached 3
> error screen pop up in order (1,2,3).
>
> I have no idea what Im doing wrong and I am the first student that I know
> that has tried this. I am basically at a dead end.
>
> I have also included my sketch up model IDF file because that is most
> likely where the error lies.
>
> Thanks in advance if someone can help with this!
>
>     Nicholas Dumoulin
>
> Carleton Business Coordinator,Team Ontario
> U.S. Department of Energy Solar Decathlon 2013
>
> E: nicholas.dumoulin at ontariosd.ca
> P: 613-323-2015
> M: Team Ontario Solar Decathlon
> c/o Carleton Student Engineering Society
> 1125 Colonel By Drive
> Ottawa, On
> K1S 5B6
> Follow our progress by liking our facebook page!
> <https://www.facebook.com/ontarioSD>
>
> <https://www.facebook.com/ontarioSD>
>
>
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120614/dabcb04b/attachment-0005.htm>