[TRNSYS-users] Problem with simulation launch

[David BRADLEY]

Mattia,
   From the error message it appears as though there is a problem with 
the *.trn file. This file is generated by TRNBuild and contains the 
transfer function coefficients for the walls, floors, ceilings, and 
roofs of your Type56 building. I would recommend that you open your 
building (*.bui, or *.b17) and resave it to make sure that there is not 
an error saying that some of the wall transfer function coefficients 
could not be generated. If you are able to save the building file from 
TRNBuild and the simulation still will not run, please send the *.b17 
and *.tpf to your distributor for assistance.
Kind regards,
  David


On 6/13/2012 04:34, MATTIA ANDREA RIO wrote:
> hi!!!  I'm trying to launch my simulation in simulation studio: i 
> would like to export the temperature of air node, in this case.
>
> however, when i start the simulatuion, this message of error (that you 
> can see into link file) appears on my display.
>
> how does it mean???
>
> Thanks!
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120613/065099da/attachment-0005.htm>