[TRNSYS-users] TRNSYS Wizard Problem

[王洋]

Dear all,

 I made the simulation using TRNSYS Wizard, however, after that I got a
TRNSYS Bug. Please see the attached figure which is the bug I met. (English
meaning:*.bui file contains an invalid path )

Do you experts have some solutions or advices for that?

Once I use the TRNSYS Wizard to produce other any new program, it appears
this bug all the time. If I can not deal with it, I will not continue to
work using TRNSYS.



Many thanks in advance!

Br.

wang



2012/6/1 <trnsys-users-request at cae.wisc.edu>

> Send TRNSYS-users mailing list submissions to
>        trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        https://mailman.cae.wisc.edu/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
>        trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
>        trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>   1. flow rate with precision (Guilbert Sara)
>   2. Water-to-water heat pump - Heat rate to load control
>      (Damien Casetta)
>
>
> ---------- 已转发邮件 ----------
> From: Guilbert Sara <wissantaise at gmail.com>
> To: trnsys-users at cae.wisc.edu
> Cc:
> Date: Fri, 1 Jun 2012 11:38:22 +0800
> Subject: [TRNSYS-users] flow rate with precision
>
> Hi Trnsys-users,
>
>
> I modeled a chilled water system with several fans coils unit on TRNSYS, I
> focalize on the repartition of the flow rate in it. The point is, I don’t
> know if there is a configuration which considers the water delay from the
> pump to the coils. And if the type 31 (pipe) induce a new flow rate
> repartition because of the pressure difference. And if I want that how I do
> ?
>
>
> Thank you for your help
>
>
> Sara
>
> CETHIL Lyon
>
>
> ---------- 已转发邮件 ----------
> From: Damien Casetta <damien.casetta at gmail.com>
> To: trnsys-users at cae.wisc.edu
> Cc:
> Date: Fri, 1 Jun 2012 18:10:09 +0200
> Subject: [TRNSYS-users] Water-to-water heat pump - Heat rate to load
> control
> Hi,
>
> I am modelling a ground-source heat pump system including a water-to-water
> heat pump (type 927), a borehole heat exchanger (type 557b) and a building
> demand profile.
>
> I have read a couple of messages in the archives about this topic but I
> haven´t understood correctly the few addressing my specific issue.
>
> Here is my point. I assume the heat pump to meet the building demand. The
> aim is then to force the heat pump load and observe how the system behaves
> (COP, ground loop fluid temperatures).
>
> I would be able to do this with an external MATLAB code (with COP values
> interpolated from catalog data) but it would be a shame not to harness
> TRNSYS potential (there is no need to re-invent the wheel as I read in a
> previous message).
>
> Let me put in other words: how to control a heat pump load?
>
> I have read about a trick to handle this, with a "lump" temperature but I
> don't get the idea behind it. Any other explanations is welcomed.
>
>
>
> Thanks in advance,
>
> Best regards,
>
>
> --
> *Damien Casetta*
>
> *Chalmers University of Technology *| Energy and Environment | Exchange
> student
> *INSA Lyon* Génie Energétique et Environnement | Elève ingénieur
> **
> +46.7.60.66.31.45
> +33.6.71.78.03.75
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120605/886ed895/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: after trnsys wizard.bmp
Type: image/bmp
Size: 983094 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120605/886ed895/attachment-0005.bin>