[TRNSYS-users] Type9 and Type16 coupling

[Antoine Gautier]

Dear Trnsys users

 

I really cannot find out what is wrong with the attached project.

Simulation fails if started at any time but 0 due to inconsistency between
current time step and current interpolation interval in Type16.

However when I trace Type9, the interval boundaries (outputs 99 and 100) do
actually bound the current time step at any time !

 

Help on this reluctant issue would be much appreciated.

Thanks a lot

--

Antoine Gautier
Solamen SAS
+33 6 58 24 02 60

 <mailto:antoine.gautier at solamen.fr> antoine.gautier at solamen.fr

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120627/ac991b73/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Project22.zip
Type: application/octet-stream
Size: 839357 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120627/ac991b73/attachment-0001.obj>