[TRNSYS-users] question about tess library components

[Matt Duffy]

Dear Artemi Spanaki, 

That component is not from the TESS Library.
It is the Type344 Transsolar Non-Standard Component - Pool model. 

You
need to contact your official TRNSYS distributor or the distributor who
sold you that component for general technical support questions such as
installing the software or component. This Trnsys-Users email list is a
volunteer discussion forum and is not intended for general installation
questions. Please make sure you state your institution and/or TRNSYS
license information when you contact your TRNSYS Distributor because
they cannot determine that based on your public domain email address.
Also, please do not post the same question multiple times on the
Trnsys-Users mailing list. 

Best regards, 

Matt Duffy 

On 2012-06-18
06:54, Artemi Spanaki wrote: 

> Hello TRNSYS users.
> 
> What is the
exact procedure in order to place a new copmonent from tess liblary
(type 344) in simulation studio (trnsys version 16) and make it work in
my project?
> 
> Yours sincerelly
> 
> A S
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120618/1934809c/attachment-0001.htm>