[TRNSYS-users] Type 56 issue

[Mehdi Shahrestani]

Dear Waseem

 

Both are possible. 

1- You can use wall type manager (using TRNbuild) to develop your desire
wall details as many as you want. And then use those predefined walls in
different spaces/zones.

2-You can set the weather inputs on type 51 constant. For this you can
simply use new equation (simulation studio/assembly/ insert new equation) 

 

Regards

Mehdi Shahrestani


  _____  

From: trnsys-users-bounces at cae.wisc.edu
[mailto:trnsys-users-bounces at cae.wisc.edu] On Behalf Of muhammad waseem
Sent: 14 June 2012 16:08
To: trnsys-users at cae.wisc.edu
Subject: [TRNSYS-users] Type 56 issue


Hi all, 
I have a question. Is it possible to have a multizone building model which
has wall of different layers? I mean e.g. inner layer plaster and then brick
and so on?
Also is it possible to set outside temperature constant and increase heat
without having any heating control to check how the temperature transfer
through the wall (temperature at different layers of the wall)?


Looking forward to hearing from you.


Kindest Regards

Waseem




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120614/05f6a602/attachment-0001.htm>