[TRNSYS-users] Problem with Type 501

[mcdowell at tess-inc.com]

Samir - 

Type 501 is a ground temperature profile model and not a
ground heat exchanger model. You will need to switch to an actual ground
heat exchanger model. 

In the future please only post your question
once to the message board. There is no need to repeat the same question
over and over. 

Regards, 

Tim 

---
Timothy P. McDowell
Executive Vice
President
Thermal Energy System Specialists, LLC
22 N Carroll St, Suite
370
Madison, WI 53703
608-274-2577

On 2012-06-06 07:59, Samir CHEHAL
wrote: 

> Dear Users,
> 
> I must modelize a geothermique pump and I
must study the temperature rise at 300m depth.
> 
> I connect type 501
with a heat exchanger and I connect this heat exchanger with my heat
pump.
> 
> The problem is that there are not inputs in type 501 to
connect with Hot/Cold side temperature of heat exchanger.
> 
> And so I
don't know how obtain the rise of temperature in the ground (at 300m
depth).
> 
> Best regards
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120606/3551aa26/attachment-0001.htm>