[TRNSYS-users] Error simulation

[David BRADLEY]

Flavien,
   Its hard to know what the cause of the error is without seeing the 
actual text from the *.lst file. The information you give confuses me a 
bit because it leads in two different directions. The message about 
orientation IB_W_95_5 is likely coming from Type56. A message about the 
number of parameters not being correct is typical when more (or less) 
parameters have been specified for a given model than are expected. The 
two don't seem to be very related. I would recommend that you contact 
your distributor directly (and send them the *.log file) to see if they 
can help.
Best,
  David


On 7/16/2012 13:00, Flavien wrote:
>> Hello everyone,
>> I have an error while i tried to run simulation. It concerns an orientation "IB_W_95_5". It seems that the number of parameters is not the same than the control cards? What does it mean?
>> Thank you
>>
>> Best regards
>>
>> Flavien
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com