[TRNSYS-users] Type 99 and non-matching data
Lerond Jérémy
jeremy.lerond at gmail.com
Wed Jul 18 01:13:48 PDT 2012
Hello,
I need to use a type 99 for my simulation. I am using the mode 3 of this
type. According to the help, I just need to provide data concerning the
total radiation on a horizontal surface and the diffuse radiation is
estimated using Reindl's reduced correlation. The problem I am encountering
is that when I am using a printer to see if the output "total radiation on
a horizontal" of type match the data that I provided, they don't (even
after a unit conversion). Could you help me figure out why? Thank you in
advance!
*Here is the content of the .99 file:*
<userdefined>
<longitude> -1.5 ! Nantes, France
<latitude> 47.2 ! Nantes, France
<gmt> 1 ! time shift from GMT, east: positive (hours) - if
solar time-> write "solar"
<interval> 1 ! Data file time interval between consecutive
lines
<firsttime> 1 ! Time corresponding to first data line (hours)
<var> IBEAM_H <col> 0 <interp> 0 <add> 0 <mult> 1
<samp> 0 !...to get radiation in W/m²
<var> IBEAM_N <col> 0 <interp> 0 <add> 0 <mult> 1
<samp> 0 !...to get radiation in W/m²
<var> IDIFF_H <col> 0 <interp> 0 <add> 0 <mult> 1
<samp> 0 !...to get radiation in W/m²
<var> IGLOB_H <col> 1 <interp> 0 <add> 0 <mult> 1
<samp> 0 !...to get radiation in W/m²
<var> TAMB <col> 0 <interp> 0 <add> 0 <mult> 1 <samp>
0 !...to get °C
<var> RHUM <col> 0 <interp> 0 <add> 0 <mult> 1 <samp>
0 !...to get relative humidity in %
<var> WSPEED <col> 0 <interp> 0 <add> 0 <mult> 1 <samp>
0 !...to get wind speed in m/s
<var> WDIR <col> 0 <interp> 0 <add> 0 <mult> 1 <samp>
0 !...to get wind direction in degree
<var> udef1 <col> 0 <interp> 0 <add> 0 <mult> 1 <samp>
0 !...to get ... in ...
<var> udef2 <col> 0 <interp> 0 <add> 0 <mult> 1 <samp>
0 !...to get ... in ...
<var> udef3 <col> 0 <interp> 0 <add> 0 <mult> 1 <samp>
0 !...to get ... in ...
<var> udef4 <col> 0 <interp> 0 <add> 0 <mult> 1 <samp>
0 !...to get ... in ...
<data>
0.0
0.0
0.0
0.0
0.0
0.0
0.0
237.1
445.2
611.6
736.4
819.5
861.1
860.9
819.2
735.8
610.8
444.2
235.9
0.0
0.0
0.0
0.0
0.0
*Here is the content of the result file:*
TIME Radiation
HOURS kJ/hr-m2
+0.0000000000000000E+00 +0.0000000000000000E+00
+1.0000000000000000E+00 +0.0000000000000000E+00
+2.0000000000000000E+00 +0.0000000000000000E+00
+3.0000000000000000E+00 +0.0000000000000000E+00
+4.0000000000000000E+00 +0.0000000000000000E+00
+5.0000000000000000E+00 +0.0000000000000000E+00
+6.0000000000000000E+00 +0.0000000000000000E+00
+7.0000000000000000E+00 +0.0000000000000000E+00
+8.0000000000000000E+00 +0.0000000000000000E+00
+9.0000000000000000E+00 +8.0483902352523259E+01
+1.0000000000000000E+01 +4.9348623188571196E+02
+1.1000000000000000E+01 +1.0645384889143988E+03
+1.2000000000000000E+01 +1.4643358237162774E+03
+1.3000000000000000E+01 +1.6656327102349712E+03
+1.4000000000000000E+01 +1.6547110991257287E+03
+1.5000000000000000E+01 +1.4323152800927367E+03
+1.6000000000000000E+01 +1.0136011597787834E+03
+1.7000000000000000E+01 +4.2710341183505699E+02
+1.8000000000000000E+01 +4.3839857276510045E+01
+1.9000000000000000E+01 +0.0000000000000000E+00
+2.0000000000000000E+01 +0.0000000000000000E+00
+2.1000000000000000E+01 +0.0000000000000000E+00
+2.2000000000000000E+01 +0.0000000000000000E+00
+2.3000000000000000E+01 +0.0000000000000000E+00
+2.4000000000000000E+01 +0.0000000000000000E+00
--
LEROND Jérémy
Tel : +336 02 31 14 66
[image: Eco-attitude]*Pensez environnement !*
*N'imprimez ce mail que si c'est vraiment nécessaire*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120718/cda97dec/attachment-0005.htm>
More information about the TRNSYS-users
mailing list