[TRNSYS-users] Geothermal heat pump

[David BRADLEY]

Michela,
   The liquid outlet temperatures are obtained by clicking on the 
"outputs" button in the main project window in TRNBuild. Select the zone 
for which you want the output, then select "surface outputs" then select 
NTYPE58 (fluid outlet temperature of active layer). You'll have to do 
the same for each of your 12 zones.
Regards,
  David


On 7/9/2012 08:39, michela canneori wrote:
> Dear All,
> I'd like to describe you my simulation because I need a suggestion.
> I'm trying to simulate the energy balance of a building (12 flats), 
> equipped with geothermal heat pump.
> For the distribution of fluid flux coming out from heat pump, I used 
> 12 Type 11f.
> They are connected each other and with Type 56 (building).
> The outputs of Type 56 are just air temperatures, so I can't connect 
> it with Type 11h.
> My objective is to calculate the temperature of fluid flux coming out 
> from radiative heating plant in each flat (simulation of building AND 
> plant).
> Attacched  to mail you can find the functional scheme I did. I hope 
> you can help me.
> Best regards,
> Michela.
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120709/e94ebb79/attachment-0005.htm>