[TRNSYS-users] type 697

Esteban De Jesus Quintana Miranda esteban_tcs at hotmail.com
Fri Jul 6 08:33:47 PDT 2012


hi i have simulated a absorption system, using a type 56 for modelling the load of the absorption chiller, for the heat transfer from the chiller water to the ventilaton air, I use a type 697 performance map fan coil, but in some steps of the simulation the chiller water take high values , for example 40 ° C. 
i attached a picture of the system in simulation studio and a picture of the result of the simulation
does anybody an idea why the chiller water take high values in some step?

 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120706/7dab9025/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: chiller-fancoil.JPG
Type: image/jpeg
Size: 78275 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120706/7dab9025/attachment-0006.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: chillerwater.JPG
Type: image/jpeg
Size: 126263 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120706/7dab9025/attachment-0007.jpe>


More information about the TRNSYS-users mailing list