[TRNSYS-users] Creating a Door in Trnsys 3D

[Nicholas Dumoulin]

Hello,

I am an engineering student new to using trnsys and here are my two issues right now.

First I would like to simulate a couple of doors that would have different materials from the external walls. I have tried several different things in the sketch up trnsys 3d plugin but every time I import it into trnsys it is taken out and I simply have a single external wall. 

The second issue is that the building I am simulating will be off the ground on piers. I do not fully understand what impacts the boundary conditions on the "floor" orientation does. I ideally want to have the heat transfer functions of my floor orientation to be based off of the outdoor air temperature and conditions.

Any help with this would be most appreciated


Nicholas Dumoulin





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120705/e7f72908/attachment-0005.htm>