[TRNSYS-users] Use of a varying boundary wall temperature profile - (Paul O Sullivan)

[Paul OSullivan]

Hi TRNSYS Users.

I am trying to establish if it is possible to use a measured temperature profile as the specified boundary condition for an internal boundary wall. I am measuring surface temperatures on both sides of the internal walls of the single room being used to validate a TRNSYS model. This means I could consider using this data as the boundary condition for these walls instead of modelling adjacent spaces to the room of interest. Does TRNBUILD only accept a single value for this condition or is there a way to apply a time varying boundary condition. Alternatively I can use an average over the period of analysis but this will give some inaccuracy to the model. 

Thanks for your help. !

Paul O Sullivan
Cork Institute of Technology.
Ireland. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120703/724c5ab6/attachment-0005.htm>