[TRNSYS-users] TRNSYS-users

[Matt Duffy]

Dear Adel Abdel Dayem, 

If there happens to be any symmetry in the
design of the solar field that you are modeling, you can model a
quadrant or section once, and simply multiply the outputs. Again that is
if the quadrants or sections are identical. In the case of the TESS HTS
example, there was indeed some symmetry, so the author only had to model
one or two of the sections and simply multiply the results. 

You can
increase the size of the assembly panel in the Simulation Studio. Simply
go to the Control Cards -> Project, and increase the height and width
accordingly. 

With that inconsistency error, that can be prevented when
you upgrade to TRNSYS version 17.1 and TESS Libraries 17.1. Please
contact your TRNSYS Distributor from whom you purchased the software
packages with any other questions in regards to your errors. 

Best
regards, 

Matt Duffy 

---

Matthew J. Duffy
Project Engineer, TRNSYS
Coordinator
 Thermal Energy System Specialists, LLC 
 22 N. Carroll St,
Suite 370 
 Madison, WI 53703 
duffy at tess-inc.com [1]
www.tess-inc.com
[2]
www.trnsys.com [3]
TRNSYS on Facebook [4] 

On 2012-07-22 06:04,
Adel Mohamed Abdelkader Abdeen wrote: 

> Dear Sir,
> I am trying to
make a validation of a big solar power plant and I use the TESS library
of high temperature. When I use the parabolic trough solar collector I
need a large area of solar field. Is there an idea to avoid to use many
collectors in parallel and series like in type 536 where it gives a
possibility to determine number of collectors in parallel.
> On the
other hand can I use a big size page to include a big project in one
window and how?
> 
> I usually get a message of 'incosistency in the
specified component between the input file and the information expected
by the type' and that error can be occured with different types like
263. Do you have any idea about that?
> 
> Adel Abdel Dayem'
> 
>
________________________________________
> ‏‏من: Adel Mohamed Abdelkader
Abdeen
> ‏‏تاريخ الإرسال: 15 يوليو, 2012 12:03 م
> To:
trnsys-users at cae.wisc.edu
> ‏‏الموضوع: ‏‏رد: TRNSYS-users Digest, Vol
91, Issue 40
> 
> Dear Sir,
> I have TRNSYS 17 and I do not have a
catalogue manual of the cogeneration components. Please inform me how to
find it.
> Regards,
> Adel Abdel Dayem
> Umm Al-Qura University
> 
>
________________________________________
> ‏‏من:
‏‏trnsys-users-bounces at cae.wisc.edu [trnsys-users-bounces at cae.wisc.edu]
بالنيابة عن trnsys-users-request at cae.wisc.edu
[trnsys-users-request at cae.wisc.edu]
> ‏‏تاريخ الإرسال: 14 يوليو, 2012
08:00 م
> To: trnsys-users at cae.wisc.edu
> ‏‏الموضوع: TRNSYS-users
Digest, Vol 91, Issue 40
> 
> Send TRNSYS-users mailing list submissions
to
> trnsys-users at cae.wisc.edu
> 
> To subscribe or unsubscribe via the
World Wide Web, visit
>
https://mailman.cae.wisc.edu/listinfo/trnsys-users
> or, via email, send
a message with subject or body 'help' to
>
trnsys-users-request at cae.wisc.edu
> 
> You can reach the person managing
the list at
> trnsys-users-owner at cae.wisc.edu
> 
> When replying, please
edit your Subject line so it is more specific
> than "Re: Contents of
TRNSYS-users digest..."
> 
> ________________________________
> 
> This
email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are
addressed. If you have received this email in error please notify Email
System Administrator (e_admin at uqu.edu.sa ) . Please note that any views
or opinions presented in this email are solely those of the author and
do not necessarily represent those of the Umm Al-Qura University.
Finally, the recipient should check this email and any attachments for
the presence of viruses. The Information Technology and Technical
Support Center of Umm Al-Qura University accepts no liability for any
damage caused by any virus transmitted by this email.
>
_______________________________________________
> TRNSYS-users mailing
list
> TRNSYS-users at cae.wisc.edu
>
https://mailman.cae.wisc.edu/listinfo/trnsys-users
 

Links:
------
[1]
mailto:duffy at tess-inc.com
[2] http://www.tess-inc.com/
[3]
http://www.trnsys.com/
[4] http://www.facebook.com/TRNSYS
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120724/f1d8e3c0/attachment-0001.htm>