[TRNSYS-users] Solution to TRNSYS-MATLAB problem

[Maarten Sourbron]

Hi all,

It took us quit a while to figure out why the TRNSYS-MATLAB coupling did not work at some machines, while it did on others.
After trying and comparing all possible options, recompiling the type155-dll, ... the following appears to be the problem:

Matlab has to be registered as a COM server.  Simply run the following command in Matlab:

regmatlabserver

And it works on all machines...
Hopefully this helps to save time :)

Kind regards,
Maarten


---

PhD student

Simulation of Thermal Systems Research group

Departement Werktuigkunde-Department of Mechanical Engineering

Katholieke Universiteit Leuven

Celestijnenlaan 300A bus 2421

3001 Heverlee (Leuven)

T : 0032 (0)16 32 28 73

F : 0032 (0)16 32 29 85

E : Maarten.Sourbron at mech.kuleuven.be<mailto:Maarten.Sourbron at mech.kuleuven.be>



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120116/de362006/attachment-0005.htm>