[TRNSYS-users] Error 24 : array size of equations

[ewen raballand]

Dear Trnsys users,

I recently had the following error : Error 24
*"The size of the array which holds the operation codes for EQUATIONs and
CONSTANTs in the TRNSYS input file has been exceeded.  Try reducing the use
of EQUATIONs and CONSTANTs in your input file if possible or increase the
limit on the maximum number of equations that TRNSYS allows."*

I know that Trnsys allows only 999 equations/constants per simulation, but
in my case I don't exceed this number.
Does anyone can tell me more about this error, because I don"t understand
the reason of the problem ?

I managed to go round this error by splitting my .*tpf in two and calling
the results of my first simulation with a data reader type, but it is not
very convenient.

Best regards,

Ewen Raballand
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120116/9c396a9e/attachment-0005.htm>