[TRNSYS-users] unit flow TRNSYS/CONTAM

Karol Bandurski karol.bandurski at put.poznan.pl
Mon Jan 16 03:22:28 PST 2012


Dear Users

 

Because my problem is very important for me I will ask again to remind my
issues.

 

I use type 56 (TRANBuild), type 97 (CONTAM) and type 3c (fan) to simulate
ventilation.

 

A.      The problem is that each type have other outputs/inputs units:

 

-          It seems to me that outputs of type 97 are air change rate per
hour.

-          Flow rate in type 3c and 56 is given by kg/hr.

-          I would like to get results in m3/hr.

 

So my questions:

1)      Should I do some conversion of units between fan (type 3c) and
CONTAM (type 97) or between CONTAM and Type 56?

 

2)      How can I get air flow in m3/hr or kg/hr form type 97?

 

B.      The second issue is that I calculate year-round infiltration and
exfiltration for my model (natural ventilation) using type 97 and type 28b
(Simulation Summary) and it appear that exfiltration is much larger. How it
is possible???

It seems to me that exfiltration and infiltration air should be equal if
there is no other way for air.

 

Regards,

Karol  

 

 

------------------------------------------------

Karol Bandurski MSc.

 <http://www.ee.put.poznan.pl/> Institute of Environmental Engineering

Poznan University of Technology

 <http://www.ee.put.poznan.pl/> www.ee.put.poznan.pl

 <http://www.put.poznan.pl/> www.put.poznan.pl

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120116/1249a1b1/attachment-0005.htm>


More information about the TRNSYS-users mailing list