[TRNSYS-users] a component of 4 way valve

[David BRADLEY]

Yeonguk Cho,
   Using the standard library, you can make a 4-way valve by putting 3 
2-way valves (Type11) in combination. If you have access to the TESS 
Hydronics Library, there are two n-way (where n is an integer set as a 
parameter) valve models; one for the supply side and one for the return 
side.
Kind regards,
  David


On 1/3/2012 20:45, 조영욱 wrote:
> Dear trnsys users,
>
>
> Hi, I'm a user of TRNSYS 17.
>
> I have to make a cycle with *4 way valve*, heat exchanger and heat 
> pump in simulation studio.
>
> but I can not find a component of *4 way valve*.
>
> Someone who knows something about this, please help..
>
>
> --------------------------------------------------------------
>
> Yeonguk Cho
>
> Building Services Engineering Laboratory
> Seoul National University of Science and Technology
>
> Tel : +82-70-7571-6557
> C.P.: +82-10-3110-2406
> cheroi at seoultech.ac.kr
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120104/fa77562d/attachment-0005.htm>