[TRNSYS-users] type 50 (pvt system)

[David BRADLEY]

Fabrizio,
   Without seeing the project, its hard to detect whether or not there 
is a problem. Bear in mind that the cell temperature for the PV is an 
average over the entire array while the fluid temperature is the 
temperature at the outlet (which could be higher or lower than the average).
Kind regards,
  David


On 12/29/2011 08:50, Fabrizio Leonforte wrote:
> Dear all,
> I'm simulating a pvt solar system, but I have one problem: the 
> temperature of the fluid at the outlet is higher than temperature of 
> cell on pv.
> In mathematical references there isn't much information about the 
> equation that trnsys use to calculate Tcell for pvt system,
> Can anybody help me (I have to use type 50 because I consider a cover 
> pvt).
> Thanks you!
>
> Fabrizio Leonforte
> Ph.D. candidate in Building Technology and Environmental Design
> Politecnico di Milano - BEST Department
> Via Bonardi, 9
> I-20133 Milano, Italy
> Tel: +39 02 2399 9468
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120104/a16428c7/attachment-0001.htm>