[TRNSYS-users] Mismatch between view factor matrix file and BUI file

[Damien Gondre]

Dear Trnsys-users and developers,

I get the following error message while running a Trnsys simulation using
detailed radiation mode with multiple airnodes in a zone:
"*Message : Surface ID order mismatch between view factor matrix file and
BUI file in Zone 4 encountered. Recreate view factor matrix for solving
problem.*"

I obviously tried to recreate the view factor matrix but it didn't work. I
also compared the BUI file with the VFM file to check if surface ID came in
the same order in both files: it does.

So I don't know what to do in order to deal with this problem.

Attached are my *.b17 and *.vfm files.
If someone has any idea, it would help!

Thank you!


Damien Gondre.

PS: I manually edited the bui file in order to quickly add coupling and
ventilation inputs that came from a former file. I checked in TRNBuild and
it seems to work properly. But I don't know if the fact that I have
manually edited the Bui file can have a link with the error message I get.

---------------------------------------
Centre de thermique de Lyon (CETHIL)
UMR 5008 - Insa de Lyon, UCBL, CNRS
Bâtiment Sadi Carnot
69621 Villeurbanne Cedex
France
+334 72 43 84 68
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120229/6c0463b1/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: model3d_8nodes.b17
Type: application/octet-stream
Size: 65675 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120229/6c0463b1/attachment-0010.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: model3d_8nodes.vfm
Type: application/octet-stream
Size: 49248 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120229/6c0463b1/attachment-0011.obj>