[TRNSYS-users] Fwd: multiple adjacent zones to one surface ??

[Stift Florian]

Dear Santeri,

an easier way to accomplish those tasks is the following:


-          Activate the zone which is adjacent to the two other zones (ZONE1 in your bitmap)

-          Right click on  the adjacent wall (or select all surfaces)

-          Select "Intersect Faces" - "With Model"

This divides the selected surfaces into smaller areas which match exactly with the adjacent surfaces.

Best,
FLorian

FLORIAN STIFT
Junior Engineer
Energy Department
Sustainable Building Technologies

AIT Austrian Institute of Technology
Österreichisches Forschungs- und Prüfzentrum Arsenal Ges.m.b.H.
Giefinggasse 2  |  1210 Vienna  |  Austria
Austria: T +43 50550-6277  |  M +43 664 815 79 46  |  F +43 50550-6613
Singapore: M +65 837 59 1 59
florian.stift at ait.ac.at<mailto:florian.stift at ait.ac.at>  |  http://www.ait.ac.at/
FN: 165088b HG Wien | UID: ATU46577208 This email and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient, please notify the sender by return e-mail or by telephone and delete this message from your system and any printout thereof. Any unauthorized use, reproduction, or dissemination of this message is strictly prohibited. Please note that e-mails are susceptible to change. Österreichisches Forschungs- und Prüfzentrum Arsenal Ges.m.b.H. shall not be liable for the improper or incomplete transmission of the information contained in this communication, nor shall it be liable for any delay in its receipt.

Von: trnsys-users-bounces at cae.wisc.edu [mailto:trnsys-users-bounces at cae.wisc.edu] Im Auftrag von David BRADLEY
Gesendet: Dienstag, 28. Februar 2012 17:02
An: Santeri Siren
Cc: trnsys-users at cae.wisc.edu
Betreff: Re: [TRNSYS-users] Fwd: multiple adjacent zones to one surface ??

Santeri,
  As far as Trnsys3D and TRNBuild are concerned, zone 1 actually has 5 walls: one facing west, one facing north, one facing east, one adjacent to zone 2 and one adjacent to zone 3. In Trnsys3D you have to draw a vertical line in zone 1 to break the one adjacent long wall into two adjacent long walls.
best,
 David


On 2/28/2012 08:21, Santeri Siren wrote:
I think my picture did not show in the last message so here it is as an attachment.

Sorry for the mix up.

Regards,
Santeri Siren
---------- Forwarded message ----------
From: Santeri Siren <santeri.siren1 at gmail.com<mailto:santeri.siren1 at gmail.com>>
Date: 2012/2/28
Subject: multiple adjacent zones to one surface ??
To: trnsys-users at cae.wisc.edu<mailto:trnsys-users at cae.wisc.edu>


Dear all,

I am trying to create my first trnsys 3d model with google sketchup. Is it possible for one particular wall (or any other surface) to be adjacent to two or more different zones.I am trying to illustrate my question with a simple picture.



If this is possible, could someone please tell me how to do it with trnsys 3d.

Regards,
Santeri Siren





_______________________________________________

TRNSYS-users mailing list

TRNSYS-users at cae.wisc.edu<mailto:TRNSYS-users at cae.wisc.edu>

https://mailman.cae.wisc.edu/listinfo/trnsys-users



--

***************************

David BRADLEY

Principal

Thermal Energy Systems Specialists, LLC

22 North Carroll Street - suite 370

Madison, WI  53703 USA



P:+1.608.274.2577

F:+1.608.278.1475

d.bradley at tess-inc.com<mailto:d.bradley at tess-inc.com>



http://www.tess-inc.com

http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120228/cd0695e4/attachment-0005.htm>