[TRNSYS-users] Phase Change Materials In TRNSYS
hotline
hotline at transsolar.com
Thu Feb 16 00:06:12 PST 2012
Dear Jeremiah,
there is a new TS Nostandard Type on the way to be released within the
next two month that offers PCM calculation.
The university that developed this type is in the final steps to get the
release done. The type has some great features like:
- it will be able to position the PCM within a certain wall layer
- userdefined PCM properties by melting and solidifying curves can be
applied
- layer temperatures can be determined in certain depth
- etc.
Regards
Christian
TRANSSOLAR Software Team
hotline at transsolar.com
www.trnsys.de
Transsolar KlimaEngineering - Technologien für energieeffizientes Bauen
und Nutzerkomfort in Gebäuden
Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart /
Amtsgericht Stuttgart - HRB 23347 / UsSt.-Id: DE152272639
Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer,
Dipl.Phys. Stefan Holst, Prof. Volkmar Bleicher
_____
Von: CleanTech Analytics [mailto:jeremiah at cleantechanalytics.com]
Gesendet: Mittwoch, 15. Februar 2012 18:50
An: trnsys-users at cae.wisc.edu
Betreff: [TRNSYS-users] Phase Change Materials In TRNSYS
Hello,
I am looking to model Phase Change Materials in TRNSYS and wonder if
anyone has any advise.
Thanks
--
Jeremiah D. Crossett
CleanTech Analytics
503-688-8951
www.cleantechanalytics.com
This document may contain valuable information proprietary to CleanTech
Analytics which is private and confidential. It may not be shared,
copied, stored or transmitted in any form without the prior written
consent of CleanTech Analytics
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120216/6795a26e/attachment-0005.htm>
More information about the TRNSYS-users
mailing list