[TRNSYS-users] ASHRAE 90.1 User Defined Libs - per Cimate Zones for ASHRAE 90.1 Compliance

[Marcus]

Hi Jean, welcome to TRNSYS! I did one LEED project in TRNSYS, but
unfortunately I couldn't dig up the constructions files. But it's fairly
easy to put together a few centimeters of concrete then add and adjust a
massless insulation layer to match the U-value required. This is what I do
to get a first approximation. As far as I know, ASHRAE doesn't specify
actually constructions for baseline - like what the exact mass should be,
except that it should be "light weight".

Sorry I can't be of more help, but let me know if there's anything else.

Marcus
-- 
Marcus Jones,  M.Sc., LEED®AP BD+C
*Freelance energy consultant*
*Vienna, Austria*


On Thu, Feb 9, 2012 at 5:44 PM, jeannieboef <jeannieboef at googlemail.com>wrote:

> Hello group, being a new user and trying to learn trnsys on a live
> project, I would love if someone could save me some time by donating me
> their user defined libraries regarding building envelope properties of the
> constructions as defined in ASHRAE 90.1. This is typically used in a
> "baseline" building for the building energy simulation required by the LEED
> certification system.
> Kind regards
> Jean Marais
>
> Sent from my iPhone
> ______________________________**_________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/**listinfo/trnsys-users<https://mailman.cae.wisc.edu/listinfo/trnsys-users>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120212/81d3922d/attachment-0005.htm>