[TRNSYS-users] e+ idf to trnsys idf

[Jean Marais]

Dear Group,
I'm just getting started with Trnsys, but have ca. 3 yrs experience with
energy plus (e+). I opened an existing e+ idf model in sketchup with the
trnsys3d plugin. There are some errors (see below). My question is: what is
the fastest way to use as much of this idf's data to get going in
Trnsbuild? What does trnsuse from the e+ idf format? constructions?
geometry of zones? etc. What should I strip out? Currently transbuild
starts the import, then errors out.
Kind regards,
Jean





Sorry...the plugin has encountered an error.  This error may cause
unpredictable behavior in the plugin--continue this session with caution!
It would probably be a good idea to exit SketchUp and start again.

For help, please contact the TRNSYS newsgroup by
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users .

 When reporting a bug, please include the error message and backtrace below
(scroll down):

ERROR:
TypeError
can't convert nil into String

BACKTRACE:
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/interfaces/DaylightingControls.rb:142:in `load'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/interfaces/DaylightingControls.rb:142:in
`create_entity'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/interfaces/DrawingInterface.rb:83:in `draw_entity'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/interfaces/ModelInterface.rb:205:in `update_model'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/interfaces/DaylightingControls.rb:142:in
`each_with_index'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/interfaces/ModelInterface.rb:201:in `each'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/interfaces/ModelInterface.rb:201:in `each_with_index'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/interfaces/ModelInterface.rb:201:in `update_model'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/interfaces/ModelInterface.rb:118:in `draw_model'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/ModelManager.rb:183:in `open_input_file'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/CommandManager.rb:71:in `open_input_file'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/MenuManager.rb:83:in `create_commands'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/ModelManager.rb:193:in `call'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/ModelManager.rb:193
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120208/86fc586e/attachment-0005.htm>