[TRNSYS-users] Genopt and trnsys16 problem
narghes doust
narghes.doust at gmail.com
Thu Feb 23 05:06:38 PST 2012
Dear all,
I have a problem in running optimization with genopt and trnsys16.
I create .bui and .dck that works properly, I change the parameters
value with their name in order to create the template files but once I run
genopt, it creates the .bui and .dck files changing the parameter name with
the right value, it starts running trnsyss but I have a trnsys error
message of the kind: "One error was find in the dek. Check the listing file
for more information" and then Genopt stops running. I cannot really
understand why it appens, also because if i compare both .dck
and .bui files that run properly with those generated by Genopt there is no
difference at all (just the value of the parameters). I attach below the
listing file.
Please help me!!!
Thank you
Bye
Narghes
TRNSYS - the TRaNsient SYstem Simulation program
The Solar Energy Lab at the University of Wisconsin - Madison, USA
Le Centre Scientifique et Technique du Batiment, Sophia Antipolis, France
Transsolar Energietechnik GmBH, Stuttgart, Germany
Thermal Energy System Specialists, Madison Wisconsin, USA
Release 16.01.0003
Listing file for: "C:\Users\Narghes\Documents\TESI DI
DOTTORATO_CARTELLE\CASI STUDIO\cubo\tmp-genopt-run-1\Simulazione_cubo.dck"
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The TRNSYS Executable (TRNExe.exe) and main DLL
(TRNDll.dll) are located in "C:\Program Files\Trnsys16_1\Exe"
*** Pre-Processing the TRNSYS EQUATIONs and CONSTANTs to check for fatal
errors.
*** Pre-Processing of EQUATIONs and CONSTANTs completed with no fatal
errors found.
*** Evaluating the EQUATIONs and CONSTANTs to determine their initial
values.
*** Finished evaluating the EQUATIONs and CONSTANTs and ready to begin
processing the remainder of the TRNSYS input file.
VERSION 16
*******************************************************************************
*** TRNSYS input file (deck) generated by
TrnsysStudio
*** on Tuesday, February 21, 2012 at
15:18
*** from TrnsysStudio project: C:\Users\Narghes\Documents\TESI DI
DOTTORATO_CARTELLE\CASI
STUDIO\cubo\Simulazione_cubo.tpf
***
*** If you edit this file, use the File/Import TRNSYS Input File function
in
*** TrnsysStudio to update the
project.
***
*** If you have problems, questions or suggestions please contact your
local
*** TRNSYS distributor or mailto:software at cstb.fr <software at cstb.fr>
***
*******************************************************************************
*******************************************************************************
***
Units
*******************************************************************************
*******************************************************************************
*** Control
cards
*******************************************************************************
* START, STOP and
STEP
CONSTANTS 3
START=0
STOP=8760
STEP=1
* User defined
CONSTANTS
! Start time End time Time
step
SIMULATION 0.0000000000000000E+00 8.7600000000000000E+03
1.0000000000000000E+00
! Integration
Convergence
TOLERANCES 1.0000000000000002E-03 1.0000000000000002E-03
! Max iterations Max warnings Trace
limit
LIMITS 30 30 31
! TRNSYS numerical integration solver
method
DFQ 1
! TRNSYS output file width, number of
characters
WIDTH 80
! NOLIST
statement
LIST
! MAP
statement
! Solver statement Minimum relaxation factor Maximum relaxation
factor
SOLVER 0
1.000000000000000
1.000000000000000
! Nan DEBUG
statement
NAN_CHECK 0
! Overwrite DEBUG
statement
OVERWRITE_CHECK 0
! disable time
report
TIME_REPORT 0
! EQUATION SOLVER
statement
EQUATION SOLVING METHOD 0
* Model "Type56b" (Type
56)
*
UNIT 5 TYPE 56
*$UNIT_NAME
Type56b
*$MODEL .\Loads and Structures\Multi-Zone Building\Without Standard Output
Files\Type56b.tmf
*$POSITION 247
210
*$LAYER Main
#
*$#
PARAMETERS 3
! 1 Logical unit for building description file
(.bui)
! 2 Star network calculation
switch
! 3 Weighting factor for operative
temperature
3.1000000000000000E+01 0.0000000000000000E+00
5.0000000000000000E-01
INPUTS 21
! Type15-3:Dry bulb temperature -> 1-
TAMB
! Type15-3:Humidity ratio -> 2-
RELHUMAMB
! Type69b-2:Fictive sky temperature -> 3-
TSKY
! Type15-3:Total tilted surface radiation for surface-3 -> 4-
IT_NORTH
! Type15-3:Total tilted surface radiation for surface-1 -> 5-
IT_SOUTH
! Type15-3:Total tilted surface radiation for surface-2 -> 6-
IT_EAST
! Type15-3:Total tilted surface radiation for surface-4 -> 7-
IT_WEST
! Type15-3:Total horizontal radiation -> 8-
IT_HORIZONTAL
! Type34:Incident receiver radiation -> 9-
IT_SOUTHHADED
! Type15-3:Beam radiation for surface-3 -> 10-
IB_NORTH
! Type15-3:Beam radiation for surface-1 -> 11-
IB_SOUTH
! Type15-3:Beam radiation for surface-2 -> 12-
IB_EAST
! Type15-3:Beam radiation for surface-4 -> 13-
IB_WEST
! Type15-3:Horizontal beam radiation -> 14-
IB_HORIZONTAL
! Type34:Beam radiation on receiver -> 15-
IB_SOUTHHADED
! Type15-3:Angle of incidence for surface-3 -> 16-
AI_NORTH
! Type15-3:Angle of incidence for surface-1 -> 17-
AI_SOUTH
! Type15-3:Angle of incidence for surface-2 -> 18-
AI_EAST
! Type15-3:Angle of incidence for surface-4 -> 19-
AI_WEST
! Type15-3:Angle of incidence for horizontal -> 20-
AI_HORIZONTAL
! Type34:Angle of incidence -> 21-
AI_SOUTHHADED
15,1 15,6
17,1 15,26 15,24
15,25 15,27
15,18 14,1 15,30
15,28 15,29
15,31 15,19 14,2
15,46 15,44
15,45 15,47 15,23
14,12
*** INITIAL INPUT
VALUES
0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00
*** External
files
ASSIGN cubo.bui 31
*|? Building description file (*.bui)
|1000
*------------------------------------------------------------------------------
* Model "Type34" (Type
34)
*
UNIT 14 TYPE 34
*$UNIT_NAME
Type34
*$MODEL .\Loads and Structures\Overhang and Wingwall
Shading\Type34.tmf
*$POSITION 243
370
*$LAYER Main
#
PARAMETERS 16
! 1 Upstream component
mode
! 2 Receiver
height
! 3 Receiver
width
! 4 Overhang
projection
! 5 Overhang
gap
! 6 Overhang left
extension
! 7 Overhang right
extension
! 8 Left wingwall
projection
! 9 Left wingwall
gap
! 10 Left wingwall top
extension
! 11 Left wingwall bottom
extension
! 12 Right wingwall
projection
! 13 Right wingwall
gap
! 14 Right wingwall top
extension
! 15 Right wingwall bottom
extension
! 16 Receiver
azimuth
0.0000000000000000E+00 1.0000000000000000E+00
0.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00
1.5000000000000000E+00 1.2000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00
INPUTS 7
! Type15-3:Solar zenith angle ->Solar zenith
angle
! Type15-3:Solar azimuth angle ->Solar azimuth
angle
! Type15-3:Total horizontal radiation ->Total horizontal
radiation
! Type15-3:Horizontal beam radiation ->Horizontal diffuse
radiation
! Type15-3:Beam radiation for surface-1 ->Beam radiation on
surface
! Type15-3:Ground reflectance ->Ground
reflectance
! Type15-3:Angle of incidence for surface-1 ->Incidence angle of direct
radiation
15,16 15,17
15,18 15,19 15,28
15,83 15,44
*** INITIAL INPUT
VALUES
9.0000000000000000E+01 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
2.0000000000000001E-01 0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Type15-3" (Type
15)
*
UNIT 15 TYPE 15
*$UNIT_NAME
Type15-3
*$MODEL .\Weather Data Reading and Processing\Standard Format\Energy+
Weather Files
(EPW)\Type15-3.tmf
*$POSITION 355
296
*$LAYER Weather - Data Files
#
PARAMETERS 18
! 1 File
Type
! 2 Logical
unit
! 3 Tilted Surface Radiation
Mode
! 4 Ground reflectance - no
snow
! 5 Ground reflectance - snow
cover
! 6 Number of
surfaces
! 7 Tracking
mode-1
! 8 Slope of
surface-1
! 9 Azimuth of
surface-1
! 10 Tracking
mode-2
! 11 Slope of
surface-2
! 12 Azimuth of
surface-2
! 13 Tracking
mode-3
! 14 Slope of
surface-3
! 15 Azimuth of
surface-3
! 16 Tracking
mode-4
! 17 Slope of
surface-4
! 18 Azimuth of
surface-4
3.0000000000000000E+00 3.3000000000000000E+01
3.0000000000000000E+00 2.0000000000000001E-01 7.0000000000000007E-01
4.0000000000000000E+00 1.0000000000000000E+00
9.0000000000000000E+01 0.0000000000000000E+00 1.0000000000000000E+00
9.0000000000000000E+01 -9.0000000000000000E+01
1.0000000000000000E+00 9.0000000000000000E+01 -1.8000000000000000E+02
1.0000000000000000E+00 9.0000000000000000E+01
9.0000000000000000E+01
*** External
files
ASSIGN ITA_Bergamo-Orio.al.Serio.160760_IGDG.epw 33
*|? Which file contains the Energy+ weather data?
|1000
*------------------------------------------------------------------------------
* Model "Type33e-3" (Type
33)
*
UNIT 16 TYPE 33
*$UNIT_NAME
Type33e-3
*$MODEL .\Physical Phenomena\Thermodynamic Properties\Psychrometrics\Dry
Bulb and Relative Humidity
Known\Type33e.tmf
*$POSITION 460
197
*$LAYER Main
#
PARAMETERS 3
! 1 Psychrometrics
mode
! 2 Wet bulb
mode
! 3 Error
mode
2.0000000000000000E+00 1.0000000000000000E+00
2.0000000000000000E+00
INPUTS 3
! Type15-3:Dry bulb temperature ->Dry bulb
temp.
! Type15-3:Percent relative humidity ->Percent relative
humidity
! [unconnected]
Pressure
15,1 15,7
CONST
*** INITIAL INPUT
VALUES
2.2000000000000000E+01 6.0000000000000000E+01
1.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Type69b-2" (Type
69)
*
UNIT 17 TYPE 69
*$UNIT_NAME
Type69b-2
*$MODEL .\Physical Phenomena\Sky Temperature\calculate cloudiness
factor\Type69b.tmf
*$POSITION 459
391
*$LAYER Main
#
PARAMETERS 2
! 1 mode for cloudiness
factor
! 2 height over sea
level
0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 4
! Type15-3:Dry bulb temperature ->Ambient
temperature
! Type33e-3:Dew point temperature. ->Dew point temperature at ambient
conditions
! Type15-3:Horizontal beam radiation ->Beam radiation on the
horizontal
! Type15-3:Sky diffuse radiation on the horizontal ->Diffuse radiation on
the
horizontal
15,1 16,8
15,19 15,20
*** INITIAL INPUT
VALUES
0.0000000000000000E+00 2.0000000000000000E+01
0.0000000000000000E+00 0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Type65d" (Type
65)
*
UNIT 19 TYPE 65
*$UNIT_NAME
Type65d
*$MODEL .\Output\Online Plotter\Online Plotter Without
File\Type65d.tmf
*$POSITION 653
285
*$LAYER Main
#
PARAMETERS 12
! 1 Nb. of left-axis
variables
! 2 Nb. of right-axis
variables
! 3 Left axis
minimum
! 4 Left axis
maximum
! 5 Right axis
minimum
! 6 Right axis
maximum
! 7 Number of plots per
simulation
! 8 X-axis
gridpoints
! 9 Shut off Online w/o
removing
! 10 Logical unit for output
file
! 11 Output file
units
! 12 Output file
delimiter
1.0000000000000000E+00 2.0000000000000000E+00
0.0000000000000000E+00 3.0000000000000000E+01 0.0000000000000000E+00
1.0000000000000000E+03 1.0000000000000000E+00
1.2000000000000000E+01 0.0000000000000000E+00 -1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 3
! Type56b: 1- TAIR_Z1 ->Left axis
variable
! Type56b: 2- QHEAT_Z1 ->Right axis
variable-1
! Type56b: 3- QCOOL_Z1 ->Right axis
variable-2
5,1 5,2
5,3
*** INITIAL INPUT
VALUES
T_PT
Q_HEAT
Q_COOL
LABELS 3
Temperatures
Heat transfer
rates
Graph
1
*------------------------------------------------------------------------------
* Model "Type28b" (Type
28)
*
UNIT 21 TYPE 28
*$UNIT_NAME
Type28b
*$MODEL .\Output\Simulation Summary\Results to External File\Without Energy
Balance\Type28b.tmf
*$POSITION 439
402
*$LAYER Outputs
#
PARAMETERS 22
! 1 Summary
interval
! 2 Summary start
time
! 3 Summary stop
time
! 4 Logical unit for the output
file
! 5 Output
mode
! 6 Operation
code-1
! 7 Operation
code-2
! 8 Operation
code-3
! 9 Operation
code-4
! 10 Operation
code-5
! 11 Operation
code-6
! 12 Operation
code-7
! 13 Operation
code-8
! 14 Operation
code-9
! 15 Operation
code-10
! 16 Operation
code-11
! 17 Operation
code-12
! 18 Operation
code-13
! 19 Operation
code-14
! 20 Operation
code-15
! 21 Operation
code-16
! 22 Operation
code-17
-1.0000000000000000E+00 0.0000000000000000E+00
8.7600000000000000E+03 3.4000000000000000E+01 2.0000000000000000E+00
-1.1000000000000000E+01 -1.2000000000000000E+01
3.0000000000000000E+00 -1.0000000000000000E+00 3.6000000000000000E+03
2.0000000000000000E+00 -4.0000000000000000E+00
-1.1000000000000000E+01 -1.0000000000000000E+00 3.6000000000000000E+03
2.0000000000000000E+00 -4.0000000000000000E+00
-1.2000000000000000E+01 -1.0000000000000000E+00 3.6000000000000000E+03
2.0000000000000000E+00 -4.0000000000000000E+00
INPUTS 2
! Type56b: 2- QHEAT_Z1 ->Summary
input-1
! Type56b: 3- QCOOL_Z1 ->Summary
input-2
5,2 5,3
*** INITIAL INPUT
VALUES
0.0000000000000000E+00 0.0000000000000000E+00
LABELS 3
Qvent
Qheat
Qcool
*** External
files
ASSIGN pippo.sum 34
*|? File for the summary results
|1000
*------------------------------------------------------------------------------
* EQUATIONS
"Parameters"
*
EQUATIONS 2
windowHeight = 1.0
overhangProjection = 1.0
*$UNIT_NAME
Parameters
*$LAYER
Main
*$POSITION 152
114
*------------------------------------------------------------------------------
END
TRANSIENT SIMULATION STARTING AT TIME = 0.0000000000000000E+00
STOPPING AT TIME = 8.7600000000000000E+03
TIMESTEP = 1 / 1
DIFFERENTIAL EQUATION ERROR TOLERANCE = 1.0000000000000002E-03
ALGEBRAIC CONVERGENCE TOLERANCE = 1.0000000000000002E-03
DIFFERENTIAL EQUATIONS SOLVED BY MODIFIED EULER
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The following Types were loaded from
TRNDll.dll: Type56, Type34, Type15, Type33, Type69, Type65, Type28
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type157_demo_release.dll" was found but did
not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type204_release.dll" was found but did not
contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 199 : TRNSYS found at least one user DLL in the
UserLib directory. (Note: Only DLL's including Types that are used in the
simulation are loaded)
Reported information : 0 user DLLs were loaded after searching in
"C:\Program Files\Trnsys16_1\UserLib\ReleaseDLLs"
*** Notice at time : 0.000000
Generated by Unit : 5
Generated by Type : 56
Message : TRNFLOW multi zone air flow model integrated
*** Notice at time : 0.000000
Generated by Unit : 5
Generated by Type : 56
Message : Active layers and internal window calculations
integrated
*** Notice at time : 0.000000
Generated by Unit : 5
Generated by Type : 56
Message : No internal humidity calculations are
performed and no condensation warnings are printed. if any of the outputs
ntype 9,10,11,26,29,40,41,47,48 or 49 is specified The humidity
calculations, using an internal timestep, will be switched on and
condensation checks are performed
*** Notice at time : 0.000000
Generated by Unit : 5
Generated by Type : 56
Message : Star network calculation: only at simulation
start
*** Fatal Error at time : 0.000000
Generated by Unit : 15
Generated by Type : 15
Message : Unable to correctly read from the supplied data
file - please check the file and re-run the simulation.
*** Notice at time : 0.000000
Generated by Unit : 5
Generated by Type : 56
Message : Geometrical distribution factors for direct
solar (GEOSURF) in zone 1 equal zero occurred. Direct solar radiaton is
treated as diffuse radiation!
==========================================================================================
TYPE56 TIME REPORT: (for debugging purpose)
------------------------------------------------------------------------------------------
time_report_unit: 6
time_filter: .8760E+07 [ms]
==========================================================================================
Level0 Level1 Level2 Level3 Level4 Counter
DTime[ms] TTime[ms]
==========================================================================================
*********************************************************************************************************
The Following UNIT Numbers, TYPE Numbers, and Logical Units Were Used in
the Supplied TRNSYS Input File:
5 15 4
14 28 6
15 33 9
16 34 31
17 56 33
19 65 34
21 69 35
*********************************************************************************************************
Total TRNSYS Calculation Time: 1.7500 Seconds
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120223/0eb125ae/attachment-0001.htm>
More information about the TRNSYS-users
mailing list