[TRNSYS-users] formatting raw weather data for use in TRNSYS17model validation

Kersken, Matthias Matthias.Kersken at ibp.fraunhofer.de
Thu Aug 30 23:28:19 PDT 2012


Dear Paul!

 

I suggest You use Type99 in free format.

This is a combined data reader an weather processor, so You can configure it
according to the structure of Your weather data.

Further information You can find in the documentation under 4.14.2.

If I’m right the first line of Your weather data will be taken as Your
starting time, so there is no problem in starting in the middle of the year;

You don’t need a whole year, just take the data You need.

Still You must set the right start time in the control cards; otherwise Your
solar radiation and Your calculated sun position will divert and create an
error.

 

Best regards,

                Matthias Kersken

 

---

 



Dipl.-Ing. Matthias Kersken
Wissenschaftlicher Mitarbeiter / Abteilung Energiesysteme

Fraunhofer-Institut für Bauphysik IBP
Institutsteil Holzkirchen

Fraunhoferstraße 10
83626 Valley

eMail:  <mailto:Matthias.Kersken at ibp.fraunhofer.de>
Matthias.Kersken at ibp.fraunhofer.de
Telefon 08024 / 643-204
Telefax 08024 / 643-366
 <http://www.ibp.fraunhofer.de/> www.ibp.fraunhofer.de


Dipl.-Ing. Matthias Kersken
Research Associate / Department Energy Systems 

Fraunhofer-Institute for Building Physics IBP
Branch Holzkirchen

Fraunhoferstraße 10
D-83626 Valley

eMail:  <mailto:Matthias.Kersken at ibp.fraunhofer.de>
Matthias.Kersken at ibp.fraunhofer.de
Phone +49 8024 / 643-204
Fax +49 8024 / 643-366
 <http://www.ibp.fraunhofer.de/> www.ibp.fraunhofer.de

 

 

 

 

 

 

 

 

 

 

 

 

 

---

 

Von: Paul OSullivan [mailto:Paul.OSullivan at cit.ie] 
Gesendet: Donnerstag, 30. August 2012 17:59
An: trnsys-users at cae.wisc.edu
Betreff: [TRNSYS-users] formatting raw weather data for use in TRNSYS17model
validation

 

Hi TRNSYS users,

I have raw weather data from a weather station that I want to use in
validating a simulation model against observational data in a single room.
What is the process of inputting and formatting this data (in .csv format)
so it can be used in TRNSYS17 as the weather file. From what I have read
Type 15 reads in standard formats (TMY2 etc) but my weather data isn’t in a
standard format. There are typical measurements with this weather station
(i.e. dry blub temp, RH, total incident radiation on horizontal surface,
barometric pressure, wind speed, wind direction, etc)

Do I need to use the ‘getIncidentRadiation’ function to generate the
required data?

Or do i need to use a weather converter utility outside of TRNSYS17?

Also, I do not have 8760 datapoints for each parameter, i want to validate
the model during a shorter time period, i.e. 1 week. is this possible with
TRNSYS?

Thanks for any help or advice on where to read up on this.

Kind Regards

Paul



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120831/9fc7663a/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 7091 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120831/9fc7663a/attachment-0005.bin>


More information about the TRNSYS-users mailing list