[TRNSYS-users] Use defined .bui file in simulation studio

[王洋]

Dear all,

I ask you a simple question. If I already defined a *.bui file well in
TRNBuild firstly, how could I then use this *.bui file in simulation studio
for Type 56? Please tell me the steps in detail if anyone has some
experiences.

Many thanks in advance!
br.

wang
2012/8/30 <trnsys-users-request at cae.wisc.edu>

> Send TRNSYS-users mailing list submissions to
>         trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         https://mailman.cae.wisc.edu/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
>         trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
>         trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>    1. formatting raw weather data for use in TRNSYS17   model
>       validation (Paul OSullivan)
>    2. Type 534 volume limitation (marciaocosta at petrobras.com.br)
>
>
> ---------- 已转发邮件 ----------
> From: "Paul OSullivan" <Paul.OSullivan at cit.ie>
> To: <trnsys-users at cae.wisc.edu>
> Cc:
> Date: Thu, 30 Aug 2012 16:58:33 +0100
> Subject: [TRNSYS-users] formatting raw weather data for use in TRNSYS17
> model validation
> **
>
> Hi TRNSYS users,
>
> I have raw weather data from a weather station that I want to use in
> validating a simulation model against observational data in a single room.
> What is the process of inputting and formatting this data (in .csv format)
> so it can be used in TRNSYS17 as the weather file. From what I have read
> Type 15 reads in standard formats (TMY2 etc) but my weather data isn’t in a
> standard format. There are typical measurements with this weather station
> (i.e. dry blub temp, RH, total incident radiation on horizontal surface,
> barometric pressure, wind speed, wind direction, etc)
>
> Do I need to use the ‘getIncidentRadiation’ function to generate the
> required data?
>
> Or do i need to use a weather converter utility outside of TRNSYS17?
>
> Also, I do not have 8760 datapoints for each parameter, i want to validate
> the model during a shorter time period, i.e. 1 week. is this possible with
> TRNSYS?
>
> Thanks for any help or advice on where to read up on this.
>
> Kind Regards
>
> Paul
>
>
>
>
> ---------- 已转发邮件 ----------
> From: marciaocosta at petrobras.com.br
> To: trnsys-users at cae.wisc.edu
> Cc:
> Date: Thu, 30 Aug 2012 13:50:47 -0300
> Subject: [TRNSYS-users] Type 534 volume limitation
>
> Hello,
>
> I´m using type 534 and I realized that the tank volume is limited to
> 100m3.  I´ve read in a previous message that this is a plugin limitation.
> Could you send me the modified plugin without this limitation?
>
> Thank you in advance.
>
> Regards,
>
>    Marcia
>
>
> "O emitente desta mensagem é responsável por seu conteúdo e endereçamento.
> Cabe ao destinatário cuidar quanto ao tratamento adequado. Sem a devida
> autorização, a divulgação, a reprodução, a distribuição ou qualquer outra
> ação em desconformidade com as normas internas do Sistema Petrobras são
> proibidas e passíveis de sanção disciplinar, cível e criminal."
>
> "The sender of this message is responsible for its content and addressing.
> The receiver shall take proper care of it. Without due authorization, the
> publication, reproduction, distribution or the performance of any other
> action not conforming to Petrobras System internal policies and procedures
> is forbidden and liable to disciplinary, civil or criminal sanctions."
>
> "El emisor de este mensaje es responsable por su contenido y
> direccionamiento. Cabe al destinatario darle el tratamiento adecuado. Sin
> la debida autorización, su divulgación, reproducción, distribución o
> cualquier otra acción no conforme a las normas internas del Sistema
> Petrobras están prohibidas y serán pasibles de sanción disciplinaria, civil
> y penal."
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120831/cd5788df/attachment-0005.htm>