[TRNSYS-users] how to set simulation START ant Timestep to avoid error

Karol Bandurski karol.bandurski at put.poznan.pl
Wed Aug 22 05:54:20 PDT 2012


Dear all

 

I would like to change 'Simulation start time' from 0 to eg. 2880 hr, my
time step is 10 min - attached PICTURE_1

 

The problem is that when I set it, I get error from Type 15:

'Unable to correctly read from the supplied data file - please check the
file and re-run the simulation.'

 

I found response of Matt Duffy related to this issue:

 <https://mailman.cae.wisc.edu/pipermail/trnsys-users/2011/007369.html>
https://mailman.cae.wisc.edu/pipermail/trnsys-users/2011/007369.html

 

but I don't understand it.. I have changed my setting as you can see on
attached PICTURE_2 and error occurs again. 

 

Could you help me?

 

Regards,

Karol

------------------------------------------------

Karol Bandurski MSc.

 <http://www.ee.put.poznan.pl/> Institute of Environmental Engineering

Poznan University of Technology

 <http://www.ee.put.poznan.pl/> www.ee.put.poznan.pl

 <http://www.put.poznan.pl/> www.put.poznan.pl

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120822/9e61265e/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PICTURE_1.png
Type: image/png
Size: 58177 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120822/9e61265e/attachment-0010.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PICTURE_2.png
Type: image/png
Size: 49405 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120822/9e61265e/attachment-0011.png>


More information about the TRNSYS-users mailing list