[TRNSYS-users] ready example of Ground-source heat pump

[David BRADLEY]

Dear Aigerim,
   You will almost surely need to have access to the TESS GHP Library in 
order to carry out your study. If you do and if you are using Trnsys17, 
then look at the GHP example that is in the ..\Trnsys17\TESS 
Models\Examples\GHP Library\. It uses water-to-water heat pumps instead 
of the more common water-source heat pumps but it will give you a good 
idea of how to set up the ground loop. The water-source heat pump then 
gets connected to a ventilation type within Type56.

   If you are using Trnsys16 then loop at the GHP example that is in 
..\Trnsys16\Tess Models\Studio Projects\Geothermal Heat Pump Library\. 
This is an example of a water-source heat pump that is connected to a 
steady stream of constant condition air. The air is cooled based only on 
an on/off timer. The timer would be replaced by a thermostat model and 
the constant condition inlet air would be replaced by a connection from 
the building.

Kind regards,
  David



On 8/21/2012 06:59, Айгерим Сейдуалиева wrote:
>
>
> Dear all,
>
> Do u have ready Ground-source heat pump integrated into the building? 
> I am writing my thesis I need to see how to built the project. Please 
> it is very urgent. I will write in a reference the author
>
> Thanks in advance
> Aigerim
>
>
> ------------------------------------------------------------------------
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120821/f4b0c386/attachment-0005.htm>