[TRNSYS-users] Error with Shading matrix

[Sascha Heinze]

Hello Ewen, 

 

thanks four your reply. 

But i want a separated window because of the possibility of shading only
parts of the whole window area. Maybe there is a better solution, but i dont
know how


 

 

Von: ewen raballand [mailto:ewen.raballand at gmail.com] 
Gesendet: Freitag, 3. August 2012 17:43
An: Heinze
Cc: trnsys-users at cae.wisc.edu
Betreff: Re: [TRNSYS-users] Error with Shading matrix

 

Dear Sascha Heinze,

I think this problem is due to windows too close one from another or just
too many windows. Seeing your picture i think that drawing one big window
rather than around 30 very close one to another is not less accurate.

Maybe you could try to simplify your model and see if it works.

Best,

Ewen

2012/8/3 Heinze <heinze at ingweber.de>

Dear TRNusers, 

 

i´ve get a error message when i start to generate the shading matrix. 

The model is a room with windows and an integrated window-doors to see the
influence of different shading types and configurations (door
shaded/unshaded, window shaded/unshaded)

Maybe this problem is known already. 

A screenshot of the error message and the model is attached to the email

 

 

Best regards

 

Sascha Heinze

 


_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120803/1ddff394/attachment-0005.htm>