[TRNSYS-users] Type 539 parameter 1, number in series

[Jeff Thornton]

<When I specify more than one collector in series (parameter 1)
nothing happens with the final result,I always get the same useful
energy gain. If I put one more type 539 in the deck and connect that in
series with the first I get the good results.> 

Did you also increase
the area parameter when you added another collector in series? 

Jeff


---

Jeff Thornton 

_President - TESS LLC_ 

_22 N. Carroll Street,
Madison WI USA 53703_ 

_Office: (608) 274-2577 Fax: (608) 278-1475_


_www.tess-inc.com_ 

_E-Mail: thornton at tess-inc.com_ 

On 08/02/2012
3:20 am, Richard Thygesen wrote: 

> Dear Trnsys users. 
> 
> When I
specify more than one collector in series (parameter 1) nothing happens
with the final result,I always get the same useful energy gain. If I put
one more type 539 in the deck and connect that in series with the first
I get the good results. 
> 
> Has anyone seen this before? And how do I
solve this problem? 
> 
> Best regards 
> 
> RICHARD THYGESEN
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120802/f1adc214/attachment-0005.htm>