[TRNSYS-users] Informatiuon

Matt Duffy duffy at tess-inc.com
Tue Aug 14 07:30:25 PDT 2012


 

Dear C.B., 

That component, Type645, was donated to the TRNSYS
standard Library for TRNSYS16. It is now Type108. Simply right click on
that component in your simulation, and go to 'Replace', and replace with
Type108 in the Controller's Library. 

Best regards, 

Matt Duffy 

On
2012-08-13 03:29, Brembilla Christian wrote: 

> Dear TRNSYS users, 
>

> I upgrade the TESS library, I actually use the v. 17.01 and
Simulöation studio 17.01.0016. 
> Unfortunately when I try to run my
program, TRNSYS gives me the following error: 
> 
> "TRNSYS Message 105:
A type was called in the TRNSYS input file but was either not linked
into trndll.dll or was not found in an external dll. A dummy subroutine
was called in its place. Please link the TYPE or remove it from the
input file. 
> 
> Reported information: Type 645 could not be located in
either the trndll.dll or in external dll- Please relink the TRNDI.dll
including this Type or make sure an external DLL in the UserLibDebugDLLs
and UserLibReleaseDLLs folders contain the Type" 
> 
> I checked only
the folders debug and release, but I cannot find exactly the TYPE645.dll

> 
> Type 645 is a controller so I suppose that is
TESSControllerLibrary_v.17.01Debug.dll 
> 
> By the way before upgrade
TESS library the program worked well, somebody could help me 
> 
> how
and where to find the correct library, otherwise is there any other
possibilities to resolve 
> 
> the problem? 
> 
> Thanks in advance 
>

> C.B.
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120814/a9ec9d6c/attachment-0001.htm>


More information about the TRNSYS-users mailing list