[TRNSYS-users] jEPlus for TRNSYS parametrics
ir.g.j.ruijg at quicknet.nl
ir.g.j.ruijg at quicknet.nl
Mon Aug 6 06:53:23 PDT 2012
I have done such a parametric study too.
I used 4 different .bui files, representing the same building, but with
different wall and glass properties, and assigned them with 4 different LU
numbers.
I made in the dck file a constant “Building”, used it in the parametric
table, and edited in the table the LU number with the building properties I
needed.
This is the simplest way to my opinion, and hopefully it leads to your
desired results too.
Kind regards,
Gerrit Jan Ruijg
The Netherlands
_____
Van: Avesani Stefano [mailto:stefano.avesani at eurac.edu]
Verzonden: 6 augustus 2012 15:36
Aan: Yi Zhang; saleh saadi; bjoern.nienborg at ise.fraunhofer.de
CC: trnsys-users at cae.wisc.edu; jsantv at gmail.com
Onderwerp: Re: [TRNSYS-users] jEPlus for TRNSYS parametrics
The fact is shortly as follow: the *.dck is what trnsys need to run.
In the dck, depending on how the model is created, there are several types
that could need external input files. This is the case, for example, of the
type56 that models a multizone building. This type needs a *.bui input file
in which many building parameters are given (e.g. the materials properties,
walls constructions,
).
So, the question is: can I tell jeplus to parametrically modify the *.bui
file, running each time trnsexe.exe calling the same *.dck (in which there
is the reference to the parametrically changed *.bui file)? in each output
folder I should then find the dck and a version of the bui modified thanks
to the string @@xxx@@.
If you need more information about what I mean just ask!
Thanks a lot!
With best regards
Stefano
Stefano Avesani
Institute for Renewable Energy
EURAC research
Viale Druso 1, I-39100 Bolzano
t +39 0471 055 654
f +39 0471 055 699
<mailto:petra.muster at eurac.edu> stefano.avesani at eurac.edu
www.eurac.edu <http://www.eurac.edu/>
This transmission is intended only for the use of the addressee and may
contain confidential or legally privileged information.
If you receive this transmission by error, please notify the author
immediately by mail and delete all copies of this transmission and any
attachments.
Any use or dissemination of this communication is strictly prohibited by the
"Privacy-Code", D.Lgs. 196/2003 and may lead to penal prosecution and
liability for damages.
P Think before you print
From: Yi Zhang [mailto:YiZhang at dmu.ac.uk]
Sent: Monday, 06 August, 2012 14:40
To: Avesani Stefano; saleh saadi; bjoern.nienborg at ise.fraunhofer.de
Cc: trnsys-users at cae.wisc.edu; jsantv at gmail.com
Subject: RE: [TRNSYS-users] jEPlus for TRNSYS parametrics
Dear Stefano/Saleh,
Sorry I don't recall if I responded to Saleh's earlier question or not...
Since I am not a TRNSYS user, José can correct me if I get anything wrong.
jEPlus searches the specified search tags in the main .DCK or .TRD files, as
well as in any external files loaded by an INCLUDE or an ASSIGN command. I
don't know about the .BUI files; but if they are loaded in the main .DCK
file, you should be able to have parameters in them. To edit a file other
than the main .DCK, you will need to use a text editor...
To the second question, jEPlus processes output files in CSV format only.
Your model needs to write output in a .csv using the right printer, and you
tell jEPlus the files you want it to collect in the "output file name(s)"
field (I am renaming it to "printer file name(s)"). So "trnsysout.csv"
should be a printer name you have in your .DCK model.
We are still working on the TRNSYS part of the users manual. It should be
ready in a few days' time.
Cheers,
Yi
Dr Yi Zhang
IESD, De Montfort University, United Kingdom
_____
From: Avesani Stefano [mailto:stefano.avesani at eurac.edu]
<mailto:%5bmailto:stefano.avesani at eurac.edu%5d>
Sent: Mon 06/08/2012 13:02
To: saleh saadi; Yi Zhang; bjoern.nienborg at ise.fraunhofer.de
Cc: trnsys-users at cae.wisc.edu
Subject: RE: [TRNSYS-users] jEPlus for TRNSYS parametrics
Dear all,
Any news concerning the use of jeplus for parametric changes in the *.bui
(and not just in the *.dck) of a trnsys project?
Thanks a lot
Best regards
Stefano
Stefano Avesani
Institute for Renewable Energy
EURAC research
Viale Druso 1, I-39100 Bolzano
t +39 0471 055 654
f +39 0471 055 699
<mailto:petra.muster at eurac.edu> stefano.avesani at eurac.edu
www.eurac.edu <http://www.eurac.edu/>
This transmission is intended only for the use of the addressee and may
contain confidential or legally privileged information.
If you receive this transmission by error, please notify the author
immediately by mail and delete all copies of this transmission and any
attachments.
Any use or dissemination of this communication is strictly prohibited by the
"Privacy-Code", D.Lgs. 196/2003 and may lead to penal prosecution and
liability for damages.
P Think before you print
From: trnsys-users-bounces at cae.wisc.edu
[mailto:trnsys-users-bounces at cae.wisc.edu]
<mailto:%5bmailto:trnsys-users-bounces at cae.wisc.edu%5d> On Behalf Of saleh
saadi
Sent: Monday, 07 May, 2012 19:59
To: Yi Zhang; bjoern.nienborg at ise.fraunhofer.de
Cc: trnsys-users at cae.wisc.edu
Subject: Re: [TRNSYS-users] jEPlus for TRNSYS parametrics
Dear Dr Zhang,
Thanks for doing this great job!!!.
I used the template file provided with GenOpt (folder is attached).
I tried using this version with TRNSYS 16 and works pretty well and quick
(24 parametric runs in less than a minute). Is it possible to add a browsing
tab to edit the building file (*.bui).
Although, I could run the parametric files but no output was extracted. In
my template file, I normally extract output in a text file but jEPlus could
not copy the file or save it in any format. Is there a way to save the text
file in the folder file similar to input file. In addition, I can't find the
"trnsysout.csv" output file anywhere. Is that enabled in this version?
regards,
saleh alsaadi
_____
From: Yi Zhang <YiZhang at dmu.ac.uk>
To: bjoern.nienborg at ise.fraunhofer.de
Cc: trnsys-users at cae.wisc.edu
Sent: Monday, May 7, 2012 7:58 AM
Subject: Re: [TRNSYS-users] jEPlus for TRNSYS parametrics
Hi Bjoern,
I should provide an example TRNSYS parametric project in the package; I will
do that in a couple of days. In the meantime, could you take a look at the
E+ example? Just open the project in the example/ folder, and you will see
how to specify parameters. Unlike E+, the weather file in a TRNSYS model is
normal parameter. You just need to create a parameter and think of a search
string (e.g. "@@weather@@") to put in the place of the weather file in the
.DCK (or .TRD) file, and then specify the alt. values of the parameter using
syntax like "{weather1.txt, weather2.txt, ...}".
Here is quick video of how to use jEPlus
(http://www.youtube.com/watch?feature=player_embedded
<http://www.youtube.com/watch?feature=player_embedded&v=9v8k52IyvV4>
&v=9v8k52IyvV4). Again it is for E+ rather than TRNSYS; but the principle is
the same.
Cheers,
Yi
Dr Yi Zhang
IESD, De Montfort University, United Kingdom
_____
From: Bjoern Nienborg [mailto:bjoern.nienborg at ise.fraunhofer.de]
<mailto:%5bmailto:bjoern.nienborg at ise.fraunhofer.de%5d>
Sent: Mon 07/05/2012 14:30
To: Yi Zhang
Subject: Re: [TRNSYS-users] jEPlus for TRNSYS parametrics
Hi Yi,
I just had a short look at it and did not find an option to vary sets of
values, e.g. if I vary a location I need to specify the name of the weather
data file, the latitude, shift in solar time and possibly some other values.
If there is this option and I did not see it, please ignore my comment.
Regards,
björn
Am 07.05.2012 13:43, schrieb Yi Zhang:
Hi all,
jEPlus is an open source parametric tool for managing EnergyPlus
simulations. Due to popular demand, support for TRNSYS simulations has been
added to the latest version (jEPlus v1.3beta). Please visit
http://www.iesd.dmu.ac.uk/jeplus/ for more details. Please note we are
currently testing the new version; any comments or suggestions will be much
appreciated.
Regards,
Yi
Dr Yi Zhang
IESD, De Montfort University, United Kingdom
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users
--
Dipl.-Ing. (FH) Björn Nienborg, M.Sc.
Division Thermal Systems and Buildings
Fraunhofer Institut für Solare Energiesysteme ISE
Heidenhofstr. 2, 79110 Freiburg, Germany
Tel.: +49 (0)761 4588-5883 FAX: +49 (0)761 4588-9000
http://www.ise.fraunhofer.de/
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120806/14f34b8b/attachment-0001.htm>
More information about the TRNSYS-users
mailing list