[TRNSYS-users] number of wind directions in trnflow

[Henk Polinder]

Dear users,

In case I enter more than 18 wind directions (angles at which cp-values are defined) in tnrnflow, it turns out that these are not used (put to zero). I thought that comis could use as many wind directions as desired. This is also stated in the trnflow manual.
Is anyone familiar with this problem?

Best Regards,

Henk Polinder
________________________________
[cid:image001.gif at 01CD21FD.C76EEAF0]
dr. H. Polinder | Specialist | Cauberg-Huygen Consulting Engineers (Maastricht, KvK 14623897)
Boterdiep 48 | 3077 AW | Postbus 9222 | 3007 AE | Rotterdam | The Netherlands
T +31 102443658<tel:+31102443658>
h.polinder at chri.nl<mailto:h.polinder at chri.nl> | www.chri.nl<http://www.chri.nl> | disclaimer<http://www.chri.nl/emaildisclaimer>

Denk aan het milieu en print deze e-mail alleen als het noodzakelijk is.
[cid:image002.gif at 01CD21FD.C76EEAF0]<http://www.annex53.nl/>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120424/ee8b15fd/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 3734 bytes
Desc: image001.gif
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120424/ee8b15fd/attachment-0010.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.gif
Type: image/gif
Size: 14757 bytes
Desc: image002.gif
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120424/ee8b15fd/attachment-0011.gif>