[TRNSYS-users] Building Type56 // Geometry Data as Output?

[Alex Rachid]

 Thanks a lot Marion Concerning the wish list it would be great if we can get in the future:1- Total Area of Zones 
2- Building’s Volume 
3- Zone’s Volume
4- Total Area of Vertical External Walls
5- Area of Vertical External Wall / Per Orientation
6- Total Roof Area (horizontal walls)
7- Total Area of Skylight (horizontal windows)
8- Area of Windows (by “Window Type” used)
9- Area of Windows by Orientation
10- Total Area of Windows.... These parameters are important when checking if a building conforms to regulations in terms of energy efficiency... Thanks for the great and prompt support you are all providing, I am learning a lot reading you... RegardsAlex
Date: Mon, 2 Apr 2012 16:44:18 +0200
From: hiller at transsolar.com
To: trnsys-users at cae.wisc.edu; wow134 at hotmail.com
Subject: AW: [TRNSYS-users]  Building Type56  // Geometry Data as Output?

























Alex,



 



there is one output in
Trnsys17: Surface Area NTYPE 113



 



In the upcoming release
there is also the airnode volume available.



 



If you have a wish list
of entities you may send it to me.



 



Marion



 





Dipl.-Ing.
Marion Hiller 


TRANSSOLAR:
KlimaEngineering - Technologien für energieeffizientes Bauen und Nutzerkomfort
in Gebäude 


Munich - New York - Stuttgart + 49.711.67976.0 





Transsolar
Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart 


Amtsgericht Stuttgart - HRB 23347, Steuernummer 99073/00911, USt-IdNr.: DE152272639



Geschäftsführer:
Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer,
Dipl.Phys. Stefan Holst, Prof. Dipl.-Ing. Bleicher 





 







 







  





Von: Alex Rachid
[mailto:wow134 at hotmail.com] 


Gesendet: Sonntag, 1. April 2012
23:23


An: trnsys users


Betreff: [TRNSYS-users] Building
Type56 // Geometry Data as Output?





 







Hi to All,



Concerning TYPE56; is there a way
to get the building geometry information (Total Area, Total Volume, Zone are,
etc) as outputs in order to use them inside equations in order to avoid
retyping them every time we modify, add or remove a Zone?



Do you have other ideas?



 



Thanks to All & Regards



Alex












 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120403/19dcf848/attachment-0005.htm>