[TRNSYS-users] TRNSYS 3D problem

David BRADLEY d.bradley at tess-inc.com
Wed Apr 11 08:53:55 PDT 2012


Muhammad,
   The idf file seems to import fine for me. Here are the steps I followed:

Open TRNBuild (in the ..\Trnsys17\Building\ directory)
Select File: Import TRNSYS3d File ...
Click the small green triangle button and browse for the *.idf file that 
you attached.
Click the larger arrow button next to the "Import" field.

After a few seconds, your building's 11 zones will appear. You then need 
to save the *.b17 file so that its additional files can be created.

Once the *.bld, *.trn, and *.inf files are generated you can go to the 
TRNSYS Simulation Studio, drag out a Type56, select the *.b17 file that 
you generated in TRNBuild, and begin attaching other components to the 
building.
Best,
  david


On 4/11/2012 09:27, Muhammad Tauha Ali wrote:
>
> Dear all,
>
> The simulation studio is not creating a 3D building project from the 
> .idf created in sketchup 8 (kindly find attached). can anybody tell me 
> how to get the TRNSYS17 to create a 3D building project?
>
> Thanks,
>
> Tauha
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120411/2e52e16c/attachment-0001.htm>


More information about the TRNSYS-users mailing list