[TRNSYS-users] Simulation timestep error (Trnsys 17)

[Antoine Gautier]

Dear Yikim

 

Did you manage to solve the reported issue? I am facing the same one right
now.

Strangely enough it appears during the simulation after 7 h in my case.

I use TRNSYS 17 00 0019 as well.

 

Thanks a lot for your help.

Regards

--

Antoine Gautier
Solamen
+33 6 98 78 56 46

antoine.gautier at solamen.fr

 


[TRNSYS-users] Simulation timestep error (Trnsys 17)


김영일  <mailto:trnsys-users%40cae.wisc.edu?Subject=Re%3A%20%5BTRNSYS-
users%5D%20Simulation%20timestep%20error%20%28Trnsys%2017%29&In-Reply-
To=%3C27366029.1304190052252.JavaMail.root%40mail%3E> yikim at seoultech.ac.
kr 
Sat Apr 30 14:00:52 CDT 2011

*	Previous message:  <https://mailman.cae.wisc.edu/pipermail/trnsys-
users/2011/007930.html> [TRNSYS-users] circular reference error
*	Next message:  <https://mailman.cae.wisc.edu/pipermail/trnsys-
users/2011/007932.html> [TRNSYS-users] (no subject)
*	Messages sorted by:  <https://mailman.cae.wisc.edu/pipermail/trnsys-
users/2011/date.html#7931> [ date ]
<https://mailman.cae.wisc.edu/pipermail/trnsys-users/2011/thread.html#7931>
[ thread ]  <https://mailman.cae.wisc.edu/pipermail/trnsys-
users/2011/subject.html#7931> [ subject ]
<https://mailman.cae.wisc.edu/pipermail/trnsys-users/2011/author.html#7931>
[ author ]

  _____  

 Dear TRNSYS users,
 
I am using TRNSYS version 17.00.0019.
I made a simple program with types 9a, 16a and 65d
for calculating solar radiations for 3 inclined slopes.
I have attached the tpf and the input files.
When I run this program I get following error message.
 
Time(h): 9, Unit: 3, Type: 16
Error message
An simulation timestep is greater than the data 
timestep for the radiation calculation.
The simulation timestep needs to be reduced.
 
Though I don't understand why I get this message,I have
changed the simulation time step to 0.1 hr from 1 hr
following the error message instruction, but I still get
the same message.
 
When I try the same thing with version 16.01.0003,
the simulation runs without fail. I have spent hours of
time to solve this error but wasn't successful.
 
YIKim, Seoultech
-------------- next part --------------

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110929/13e3b9da/attachment-0005.htm>