[TRNSYS-users] problem with more than one type on the same simiulation

[kordou]

Hi

 

I have create a new type on TRNSYS 16 for my phd thesis, that simulates. I
want this type to be able to have more than on instances on the same
simulation

So I have followed the programming manual and I have add a part that
controls if UNIT=TYPE (INFO(1) = INFO(2)) and if not it re reads the
PARAMETER.

 

The way that I have create the new type is the black box technique. I give
input and parameter and I get output. 

To be able to calculate the results I have to store at the end of each time
step some variables to the trnsys and retrieve them at the start of next
time step. 

 

The first problem that I have is that the INFO(1) and INFO(2) have value = 0
and the type cannot reread the parameters!

 

And my second problem is that I have noticed that these stored variables are
mixed between the two instances of my type on the same time step. 

 

To store the variables I am using the 

CALL setStorageVars(LocalSave,NITEMS,INFO)

 

And to retrive them 

CALL getStorageVars(LocalSave,NITEMS,INFO)

 

 

Could someone help me on how I can solve these problems ?

 

 

Thank you in advanced

Regard

Kordou

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110926/0dde2e65/attachment-0005.htm>