[TRNSYS-users] Type 60d, problem outlet temperature

[Michael Markusch]

Hi,

I use the type 60d only with the first heating element. At the
simulationstart I set the temperature at inlet 1 on 10 C, but the
temperature at outlet 1 is less than 10 C. After a while it is correct.

How can I fix this? Is there a initial temperature of the thermal
storage?

Thanks,
Michael
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110923/9ebd9934/attachment-0003.sig>