[TRNSYS-users] Moisture transfer with the exterior

[D'Antoni Matteo]

Dear All,

I'm dealing with moisture transfer issues through porous building
elements. I aim to simulate this topic with Type 56.

As you know T.56 does not model any moisture transfer with the exterior,
so external climate has no effect on moisture balance within a thermal
zone.

Is there any dedicated Type or trick in order to carry out this
calculation in parallel with heat transfer?

Regards,

 

Matteo D'Antoni, PhD

Institute for Renewable Energy

 

EURAC Research

Viale Druso/Drususallee 1

39100 Bolzano/Bozen (BZ)

Italy

 

t +39 0471 055 614

f +39 0471 055 699

matteo.dantoni at eurac.edu <mailto:matteo.dantoni at eurac.edu> 

www.eurac.edu <http://www.eurac.edu/> 

 

This transmission is intended only for the use of the addressee and may
contain confidential or legally privileged information. 
If you receive this transmission by error, please notify the author
immediately by mail and delete all copies of this transmission and any
attachments. 
Any use or dissemination of this communication is strictly prohibited by
the "Privacy-Code", D.Lgs. 196/2003 and may conduct to penal prosecution
and liability for damages.

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110919/4ed59198/attachment-0005.htm>