[TRNSYS-users] trnbuild and trnsys3d sketchup - shading zone issue (Type56)

[Nick LaHam]

Hello,

I am using 3D geometry from Trnsys3d Google SketchUp. I created a very
simple building with two thermal zones to test this. On top of one thermal
zone I placed a shading zone and created a large box on top of one of the
zones.

When I import the idf into the TRSNSYS building wizard and use TRNBuild to
specify my outputs to be surface temperatures, TRNSYS is telling me the 2
top surfaces remain the same temperature over the course of the whole
simulation. This would imply the shading did not work, correct? The shaded
surface should show less temperature than the non-shaded of course.

Has anyone used the shading zones and had successful results with them? Does
anyone out there use Trnsys3d much that I could converse with?

Thanks,
Nick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110916/b5776374/attachment-0005.htm>