Dear Trnsys users
I'm phasing problem with the last version of TRNSYS 17 due to the modifications made for some components sucg as vacuum tube collectors and flat plate collectos. I was running the same project with the previous version and I update to the last version (TRNSYS and TESS) and I made all nessassary changes ( that's what I think is correct). But, the simulation is stopped at certain time and when I change the weather file the simulation stopped at diffenet times and some times didn't work at all.
I've attached all the files, please if any one can help I would be very grateful to him
Many thanks in advance
Dr. Mohammad Abdunnabi
Head of Thermal Energy conversion Department
Center for Solar Energy Research and Studies (CSERS)
Tripoli-Libya
P.O.Box: 12932
Tel.: +218 21 3699323
Fax.: +218 21 3699322
Office Phone: +218 21 7201993
Mobile Phone: +218 92 2256067
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110914/ec56beb8/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Factoryx.dck
Type: application/octet-stream
Size: 26670 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110914/ec56beb8/attachment-0015.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Factoryx.log
Type: application/octet-stream
Size: 9457 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110914/ec56beb8/attachment-0016.obj>
-------------- next part --------------
TRNSYS - the TRaNsient SYstem Simulation program
The Solar Energy Lab at the University of Wisconsin - Madison, USA
Le Centre Scientifique et Technique du Batiment, Sophia Antipolis, France
Transsolar Energietechnik GmBH, Stuttgart, Germany
Thermal Energy System Specialists, LLC, Madison Wisconsin, USA
Release 17.00.0019
Listing file for: "C:\Trnsys17\MyProjects\Project10\Factoryx.dck"
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The TRNSYS Executable (TRNExe.exe) and main DLL (TRNDll.dll) are located in "C:\Trnsys17\Exe"
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : 208
TRNSYS Message 75 : The Type referenced below requires descriptors instead of initial values.
Reported information : Type 208
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : 535
TRNSYS Message 75 : The Type referenced below requires descriptors instead of initial values.
Reported information : Type 535
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : 580
TRNSYS Message 76 : The following Type has been identified as allowing the unit specifications (kg/h for example) after the input specifications and intial values for the inputs. The critical parameter number, and the value of this critical parameter that indicates that the units will be supplied is also listed. This information was retrieved from the VarUnits.dat file loacted in the \Exe directory of your TRNSYS 16 installation.
Reported information : Type 580, Critical Parameter 11, Parameter Value 1
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : 580
TRNSYS Message 88 : The following Type has been identified as allowing FORMAT statements. This information was retrieved from the Formats.dat file loacted in the \Exe directory of your TRNSYS 16 installation.
Reported information : Type 580
*** Pre-Processing the TRNSYS EQUATIONs and CONSTANTs to check for fatal errors.
*** Pre-Processing of EQUATIONs and CONSTANTs completed with no fatal errors found.
*** Evaluating the EQUATIONs and CONSTANTs to determine their initial values.
*** Finished evaluating the EQUATIONs and CONSTANTs and ready to begin processing the remainder of the TRNSYS input file.
VERSION 17
*******************************************************************************
*** TRNSYS input file (deck) generated by TrnsysStudio
*** on Wednesday, September 14, 2011 at 13:55
*** from TrnsysStudio project: C:\Trnsys17\MyProjects\Project10\Factoryx.tpf
***
*** If you edit this file, use the File/Import TRNSYS Input File function in
*** TrnsysStudio to update the project.
***
*** If you have problems, questions or suggestions please contact your local
*** TRNSYS distributor or mailto:software at cstb.fr
***
*******************************************************************************
*******************************************************************************
*** Units
*******************************************************************************
*******************************************************************************
*** Control cards
*******************************************************************************
* START, STOP and STEP
CONSTANTS 3
START=4800
STOP=5000
STEP=1
* User defined CONSTANTS
! Start time End time Time step
SIMULATION 4.8000000000000000E+03 5.0000000000000000E+03 1.0000000000000000E+00
! Integration Convergence
TOLERANCES 1.0000000000000002E-03 1.0000000000000002E-03
! Max iterations Max warnings Trace limit
LIMITS 30 500 51
! TRNSYS numerical integration solver method
DFQ 1
! TRNSYS output file width, number of characters
WIDTH 80
! NOLIST statement
LIST
! MAP statement
! Solver statement Minimum relaxation factor Maximum relaxation factor
SOLVER 0
1.000000000000000
1.000000000000000
! Nan DEBUG statement
NAN_CHECK 0
! Overwrite DEBUG statement
OVERWRITE_CHECK 0
! disable time report
TIME_REPORT 0
! EQUATION SOLVER statement
EQUATION SOLVING METHOD 0
* Model "Type14b" (Type 14)
*
UNIT 9 TYPE 14
*$UNIT_NAME Type14b
*$MODEL .\Utility\Forcing Functions\Water Draw\Type14b.tmf
*$POSITION 974 532
*$LAYER Main #
PARAMETERS 14
! 1 Initial value of time
! 2 Initial value of function
! 3 Time at point-1
! 4 Water draw at point -1
! 5 Time at point-2
! 6 Water draw at point -2
! 7 Time at point-3
! 8 Water draw at point -3
! 9 Time at point-4
! 10 Water draw at point -4
! 11 Time at point-5
! 12 Water draw at point -5
! 13 Time at point-6
! 14 Water draw at point -6
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 9.0000000000000000E+00
0.0000000000000000E+00 9.0000000000000000E+00 1.0000000000000001E-01 1.8000000000000000E+01 1.0000000000000001E-01
1.8000000000000000E+01 0.0000000000000000E+00 2.4000000000000000E+01 0.0000000000000000E+00
*------------------------------------------------------------------------------
* EQUATIONS "M&T"
*
EQUATIONS 2
Q = [9,1]*6500
T = 17
*$UNIT_NAME M&T
*$LAYER Main
*$POSITION 892 473
*------------------------------------------------------------------------------
* Model "Type65d" (Type 65)
*
UNIT 11 TYPE 65
*$UNIT_NAME Type65d
*$MODEL .\Output\Online Plotter\Online Plotter Without File\Type65d.tmf
*$POSITION 743 289
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical unit for output file
! 11 Output file units
! 12 Output file delimiter
2.0000000000000000E+00 2.0000000000000000E+00 0.0000000000000000E+00 6.0000000000000000E+01 0.0000000000000000E+00
3.0000000000000000E+03 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 -1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 4
! Tee piece-10:Outlet temperature ->Left axis variable-1
! Type6-2:Outlet fluid temperature ->Left axis variable-2
! Tee piece-10:Outlet flow rate ->Right axis variable-1
! Type6-2:Outlet fluid flow rate ->Right axis variable-2
30,1 50,1 30,2 50,2
*** INITIAL INPUT VALUES
T_Collector T_Load m_Collecto r m_Loa d
LABELS 3
Temperatures C
Flow rates Lit/hr
Graph 1
*------------------------------------------------------------------------------
* Model "Type38-2" (Type 38)
*
UNIT 13 TYPE 38
*$UNIT_NAME Type38-2
*$MODEL .\Thermal Storage\Plug-Flow Tank\Type38.tmf
*$POSITION 701 404
*$LAYER Main #
PARAMETERS 17
! 1 Inlet position mode
! 2 Tank volume
! 3 Tank height
! 4 Height of collector return
! 5 Fluid specific heat
! 6 Fluid density
! 7 Thermal conductivity
! 8 Tank configuration
! 9 Overall Loss Coefficient
! 10 Insulation ratio
! 11 Initial temperature
! 12 Maximum heating rate
! 13 Auxiliary height
! 14 Thermostat height
! 15 Set point temperature
! 16 Temperature deadband
! 17 Flue loss coefficient
1.0000000000000000E+00 5.0000000000000000E-01 1.5000000000000000E+00 1.3999999999999999E+00 4.1899999999999995E+00
1.0000000000000000E+03 1.5000000000000000E+00 1.0000000000000000E+00 5.0000000000000000E+00 1.0000000000000000E+00
2.0000000000000000E+01 1.6000000000000000E+04 1.0000000000000000E+00 1.2500000000000000E+00 4.0000000000000000E+01
5.0000000000000000E+00 0.0000000000000000E+00
INPUTS 6
! Tee piece-10:Outlet temperature ->Hot-side temperature
! Tee piece-10:Outlet flow rate ->Hot-side flowrate
! Type11b:Temperature at outlet 1 ->Cold-side temperature
! Type11b:Flowrate at outlet 1 ->Cold-side flowrate
! Type109-TMY2:Ambient temperature ->Environment temperature
! [unconnected] Control signal
30,1 30,2 51,1 51,2 31,1
CONST
*** INITIAL INPUT VALUES
4.5000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02 2.2000000000000000E+01
0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Type538-2" (Type 538)
*
UNIT 19 TYPE 538
*$UNIT_NAME Type538-2
*$MODEL .\Solar Library (TESS)\Evacuated Tube Solar Collector\Type538.tmf
*$POSITION 244 426
*$LAYER Main #
*$# This component sets the flow rate for all connected flow loop components if the variable speed option is enabled.
PARAMETERS 17
! 1 Collector array area
! 2 Number in series
! 3 Fluid specific heat
! 4 Capacitance of Collector
! 5 Number of Nodes
! 6 Initial Temperature
! 7 Tested flow rate per unit area
! 8 Fluid specific heat at test conditions
! 9 Collector test mode
! 10 Tested Intercept efficiency (a0)
! 11 Tested 1st order loss coefficient (a1)
! 12 Tested 2nd order loss coefficient (a2)
! 13 Logical unit for IAM data
! 14 Number of transverse angles
! 15 Number of longitudinal angles
! 16 Minimum array flowrate
! 17 Maximum array flow rate
2.0000000000000000E+00 1.0000000000000000E+00 4.1899999999999995E+00 1.0000000000000000E+01 1.0000000000000000E+02
2.0000000000000000E+01 5.0000000000000000E+01 4.1899999999999995E+00 1.0000000000000000E+00 7.0000000000000007E-01
1.0000000000000000E+00 1.0000000000000000E+00 8.9000000000000000E+01 1.0000000000000000E+01 1.0000000000000000E+01
0.0000000000000000E+00 1.0000000000000000E+04
INPUTS 13
! Type11f-4:Temperature at outlet 1 ->Inlet temperature
! Type11f-4:Flow rate at outlet 1 ->Array inlet flow rate
! Type109-TMY2:Ambient temperature ->Ambient temperature
! Type109-TMY2:beam radiation on tilted surface ->Beam radiation on the tilted surface
! Type109-TMY2:sky diffuse radiation on tilted surface ->Sky diffuse radiation on tilt
! Type109-TMY2:ground reflected diffuse radiation on tilted surface ->Ground diffuse radiation on tilt
! Type109-TMY2:slope of tilted surface ->Collector slope
! Type109-TMY2:angle of incidence for tilted surface ->Incidence angle
! [unconnected] Collector azimuth angle
! Type109-TMY2:solar zenith angle ->Solar zenith angle
! Type109-TMY2:solar azimuth angle ->Solar azimuth angle
! [unconnected] Pump Control Specification
! [unconnected] Outlet Temperature Setpoint
35,1 35,2 31,1 31,19 31,20
31,21 31,23 31,22 CONST 31,10
31,11 CONST CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 4.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 6.0000000000000000E+01
*** External files
ASSIGN C:\Trnsys17\Tess Models\SampleCatalogData\Bi-Axial IAMs\Iam_2d.dat 89
*|? Which file contains the IAM data for this collector? |1000
*------------------------------------------------------------------------------
* Model "Type538-3" (Type 538)
*
UNIT 25 TYPE 538
*$UNIT_NAME Type538-3
*$MODEL .\Solar Library (TESS)\Evacuated Tube Solar Collector\Type538.tmf
*$POSITION 346 428
*$LAYER Main #
*$# This component sets the flow rate for all connected flow loop components if the variable speed option is enabled.
PARAMETERS 17
! 1 Collector array area
! 2 Number in series
! 3 Fluid specific heat
! 4 Capacitance of Collector
! 5 Number of Nodes
! 6 Initial Temperature
! 7 Tested flow rate per unit area
! 8 Fluid specific heat at test conditions
! 9 Collector test mode
! 10 Tested Intercept efficiency (a0)
! 11 Tested 1st order loss coefficient (a1)
! 12 Tested 2nd order loss coefficient (a2)
! 13 Logical unit for IAM data
! 14 Number of transverse angles
! 15 Number of longitudinal angles
! 16 Minimum array flowrate
! 17 Maximum array flow rate
2.0000000000000000E+00 1.0000000000000000E+00 4.1899999999999995E+00 1.0000000000000000E+01 1.0000000000000000E+02
2.0000000000000000E+01 5.0000000000000000E+01 4.1899999999999995E+00 1.0000000000000000E+00 7.0000000000000007E-01
1.0000000000000000E+00 1.0000000000000000E+00 9.0000000000000000E+01 1.0000000000000000E+01 1.0000000000000000E+01
0.0000000000000000E+00 1.0000000000000000E+04
INPUTS 13
! Type11f-3:Temperature at outlet 1 ->Inlet temperature
! Type11f-3:Flow rate at outlet 1 ->Array inlet flow rate
! Type109-TMY2:Ambient temperature ->Ambient temperature
! Type109-TMY2:beam radiation on tilted surface ->Beam radiation on the tilted surface
! Type109-TMY2:sky diffuse radiation on tilted surface ->Sky diffuse radiation on tilt
! Type109-TMY2:ground reflected diffuse radiation on tilted surface ->Ground diffuse radiation on tilt
! Type109-TMY2:slope of tilted surface ->Collector slope
! Type109-TMY2:angle of incidence for tilted surface ->Incidence angle
! [unconnected] Collector azimuth angle
! Type109-TMY2:solar zenith angle ->Solar zenith angle
! Type109-TMY2:solar azimuth angle ->Solar azimuth angle
! [unconnected] Pump Control Specification
! [unconnected] Outlet Temperature Setpoint
29,1 29,2 31,1 31,19 31,20
31,21 31,23 31,22 CONST 31,10
31,11 CONST CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 4.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 2.0000000000000000E+02
*** External files
ASSIGN C:\Trnsys17\Tess Models\SampleCatalogData\Bi-Axial IAMs\Iam_2d.dat 90
*|? Which file contains the IAM data for this collector? |1000
*------------------------------------------------------------------------------
* Model "Type538-5" (Type 538)
*
UNIT 26 TYPE 538
*$UNIT_NAME Type538-5
*$MODEL .\Solar Library (TESS)\Evacuated Tube Solar Collector\Type538.tmf
*$POSITION 460 428
*$LAYER Main #
*$# This component sets the flow rate for all connected flow loop components if the variable speed option is enabled.
PARAMETERS 17
! 1 Collector array area
! 2 Number in series
! 3 Fluid specific heat
! 4 Capacitance of Collector
! 5 Number of Nodes
! 6 Initial Temperature
! 7 Tested flow rate per unit area
! 8 Fluid specific heat at test conditions
! 9 Collector test mode
! 10 Tested Intercept efficiency (a0)
! 11 Tested 1st order loss coefficient (a1)
! 12 Tested 2nd order loss coefficient (a2)
! 13 Logical unit for IAM data
! 14 Number of transverse angles
! 15 Number of longitudinal angles
! 16 Minimum array flowrate
! 17 Maximum array flow rate
2.0000000000000000E+00 1.0000000000000000E+00 4.1899999999999995E+00 1.0000000000000000E+01 1.0000000000000000E+02
2.0000000000000000E+01 5.0000000000000000E+01 4.1899999999999995E+00 1.0000000000000000E+00 7.0000000000000007E-01
1.0000000000000000E+00 1.0000000000000000E+00 9.1000000000000000E+01 1.0000000000000000E+01 1.0000000000000000E+01
0.0000000000000000E+00 1.0000000000000000E+04
INPUTS 13
! Type11f:Temperature at outlet 1 ->Inlet temperature
! Type11f:Flow rate at outlet 1 ->Array inlet flow rate
! Type109-TMY2:Ambient temperature ->Ambient temperature
! Type109-TMY2:beam radiation on tilted surface ->Beam radiation on the tilted surface
! Type109-TMY2:sky diffuse radiation on tilted surface ->Sky diffuse radiation on tilt
! Type109-TMY2:ground reflected diffuse radiation on tilted surface ->Ground diffuse radiation on tilt
! Type109-TMY2:slope of tilted surface ->Collector slope
! Type109-TMY2:angle of incidence for tilted surface ->Incidence angle
! [unconnected] Collector azimuth angle
! Type109-TMY2:solar zenith angle ->Solar zenith angle
! Type109-TMY2:solar azimuth angle ->Solar azimuth angle
! [unconnected] Pump Control Specification
! [unconnected] Outlet Temperature Setpoint
27,1 27,2 31,1 31,19 31,20
31,21 31,23 31,22 CONST 31,10
31,11 CONST CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 4.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 9.0000000000000000E+01
*** External files
ASSIGN C:\Trnsys17\Tess Models\SampleCatalogData\Bi-Axial IAMs\Iam_2d.dat 91
*|? Which file contains the IAM data for this collector? |1000
*------------------------------------------------------------------------------
* Model "Type11f" (Type 11)
*
UNIT 27 TYPE 11
*$UNIT_NAME Type11f
*$MODEL .\Hydronics\Flow Diverter\Other Fluids\Type11f.tmf
*$POSITION 517 489
*$LAYER Main #
PARAMETERS 1
! 1 Controlled flow diverter mode
2.0000000000000000E+00
INPUTS 3
! Type3b-3:Outlet fluid temperature ->Inlet temperature
! Type3b-3:Outlet flow rate ->Inlet flow rate
! [unconnected] Control signal
33,1 33,2 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 8.0000000000000004E-01
*------------------------------------------------------------------------------
* Model "Tee piece-2" (Type 11)
*
UNIT 28 TYPE 11 piece-2
*$UNIT_NAME Tee piece-2
*$MODEL .\Hydronics\Tee-Piece\Other Fluids\Type11h.tmf
*$POSITION 449 346
*$LAYER Main #
PARAMETERS 1
! 1 Tee piece mode
1.0000000000000000E+00
INPUTS 4
! Tee -4:Outlet temperature ->Temperature at inlet 1
! Tee -4:Outlet flow rate ->Flow rate at inlet 1
! Type538-3:Outlet temperature ->Temperature at inlet 2
! Type538-3:Outlet flow rate ->Flow rate at inlet 2
36,1 36,2 25,1 25,2
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02
*------------------------------------------------------------------------------
* Model "Type11f-3" (Type 11)
*
UNIT 29 TYPE 11
*$UNIT_NAME Type11f-3
*$MODEL .\Hydronics\Flow Diverter\Other Fluids\Type11f.tmf
*$POSITION 422 489
*$LAYER Main #
PARAMETERS 1
! 1 Controlled flow diverter mode
2.0000000000000000E+00
INPUTS 3
! Type11f:Temperature at outlet 2 ->Inlet temperature
! Type11f:Flow rate at outlet 2 ->Inlet flow rate
! [unconnected] Control signal
27,3 27,4 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 7.5000000000000011E-01
*------------------------------------------------------------------------------
* Model "Tee piece-10" (Type 11)
*
UNIT 30 TYPE 11 piece-10
*$UNIT_NAME Tee piece-10
*$MODEL .\Hydronics\Flow Mixer\Other Fluids\Type11d.tmf
*$POSITION 571 363
*$LAYER Main #
PARAMETERS 1
! 1 Controlled flow mixer mode
3.0000000000000000E+00
INPUTS 5
! Tee piece-2:Outlet temperature ->Temperature at inlet 1
! Tee piece-2:Outlet flow rate ->Flow rate at inlet 1
! Type538-5:Outlet temperature ->Temperature at inlet 2
! Type538-5:Outlet flow rate ->Flow rate at inlet 2
! [unconnected] Control signal
28,1 28,2 26,1 26,2 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02 5.0000000000000000E-01
*------------------------------------------------------------------------------
* Model "Type109-TMY2" (Type 109)
*
UNIT 31 TYPE 109
*$UNIT_NAME Type109-TMY2
*$MODEL .\Weather Data Reading and Processing\Standard Format\TMY2\Type109-TMY2.tmf
*$POSITION 78 309
*$LAYER Main #
PARAMETERS 4
! 1 Data Reader Mode
! 2 Logical unit
! 3 Sky model for diffuse radiation
! 4 Tracking mode
2.0000000000000000E+00 9.2000000000000000E+01 4.0000000000000000E+00 1.0000000000000000E+00
INPUTS 3
! [unconnected] Ground reflectance
! [unconnected] Slope of surface
! [unconnected] Azimuth of surface
CONST CONST CONST
*** INITIAL INPUT VALUES
2.0000000000000001E-01 3.2000000000000000E+01 0.0000000000000000E+00
*** External files
ASSIGN C:\Trnsys17\Weather\US-TMY2\US-AK-Cold-Bay-25624.tm2 92
*|? Weather data file |1000
*------------------------------------------------------------------------------
* Model "Type3b-3" (Type 3)
*
UNIT 33 TYPE 3
*$UNIT_NAME Type3b-3
*$MODEL .\Hydronics\Pumps\Single Speed\Type3b.tmf
*$POSITION 594 519
*$LAYER Main #
PARAMETERS 5
! 1 Maximum flow rate
! 2 Fluid specific heat
! 3 Maximum power
! 4 Conversion coefficient
! 5 Power coefficient
4.5000000000000000E+02 4.1899999999999995E+00 7.0000000000000000E+01 5.0000000000000003E-02 5.0000000000000000E-01
INPUTS 3
! Type38-2:Temperature to heat source ->Inlet fluid temperature
! Type38-2:Flowrate to heat source ->Inlet mass flow rate
! Type2b-2:Output control function ->Control signal
13,1 13,2 37,1
*** INITIAL INPUT VALUES
2.0000000000000000E+01 6.0000000000000000E+02 1.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Type538" (Type 538)
*
UNIT 34 TYPE 538
*$UNIT_NAME Type538
*$MODEL .\Solar Library (TESS)\Evacuated Tube Solar Collector\Type538.tmf
*$POSITION 146 426
*$LAYER Main #
*$# This component sets the flow rate for all connected flow loop components if the variable speed option is enabled.
PARAMETERS 17
! 1 Collector array area
! 2 Number in series
! 3 Fluid specific heat
! 4 Capacitance of Collector
! 5 Number of Nodes
! 6 Initial Temperature
! 7 Tested flow rate per unit area
! 8 Fluid specific heat at test conditions
! 9 Collector test mode
! 10 Tested Intercept efficiency (a0)
! 11 Tested 1st order loss coefficient (a1)
! 12 Tested 2nd order loss coefficient (a2)
! 13 Logical unit for IAM data
! 14 Number of transverse angles
! 15 Number of longitudinal angles
! 16 Minimum array flowrate
! 17 Maximum array flow rate
2.0000000000000000E+00 1.0000000000000000E+00 4.1899999999999995E+00 1.0000000000000000E+01 1.0000000000000000E+02
2.0000000000000000E+01 5.0000000000000000E+01 4.1899999999999995E+00 1.0000000000000000E+00 7.0000000000000007E-01
1.0000000000000000E+00 1.0000000000000000E+00 8.8000000000000000E+01 1.0000000000000000E+01 1.0000000000000000E+01
0.0000000000000000E+00 1.0000000000000000E+04
INPUTS 13
! Type11f-5:Temperature at outlet 1 ->Inlet temperature
! Type11f-5:Flow rate at outlet 1 ->Array inlet flow rate
! Type109-TMY2:Ambient temperature ->Ambient temperature
! Type109-TMY2:beam radiation on tilted surface ->Beam radiation on the tilted surface
! Type109-TMY2:sky diffuse radiation on tilted surface ->Sky diffuse radiation on tilt
! Type109-TMY2:ground reflected diffuse radiation on tilted surface ->Ground diffuse radiation on tilt
! Type109-TMY2:slope of tilted surface ->Collector slope
! Type109-TMY2:angle of incidence for tilted surface ->Incidence angle
! [unconnected] Collector azimuth angle
! Type109-TMY2:solar zenith angle ->Solar zenith angle
! Type109-TMY2:solar azimuth angle ->Solar azimuth angle
! [unconnected] Pump Control Specification
! [unconnected] Outlet Temperature Setpoint
39,1 39,2 31,1 31,19 31,20
31,21 31,23 31,22 CONST 31,10
31,11 CONST CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 4.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 6.0000000000000000E+01
*** External files
ASSIGN C:\Trnsys17\Tess Models\SampleCatalogData\Bi-Axial IAMs\Iam_2d.dat 88
*|? Which file contains the IAM data for this collector? |1000
*------------------------------------------------------------------------------
* Model "Type11f-4" (Type 11)
*
UNIT 35 TYPE 11
*$UNIT_NAME Type11f-4
*$MODEL .\Hydronics\Flow Diverter\Other Fluids\Type11f.tmf
*$POSITION 320 489
*$LAYER Main #
PARAMETERS 1
! 1 Controlled flow diverter mode
2.0000000000000000E+00
INPUTS 3
! Type11f-3:Temperature at outlet 2 ->Inlet temperature
! Type11f-3:Flow rate at outlet 2 ->Inlet flow rate
! [unconnected] Control signal
29,3 29,4 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 6.6666660000000011E-01
*------------------------------------------------------------------------------
* Model "Tee -4" (Type 11)
*
UNIT 36 TYPE 11 -4
*$UNIT_NAME Tee -4
*$MODEL .\Hydronics\Tee-Piece\Other Fluids\Type11h.tmf
*$POSITION 329 346
*$LAYER Main #
PARAMETERS 1
! 1 Tee piece mode
1.0000000000000000E+00
INPUTS 4
! Type538-2:Outlet temperature ->Temperature at inlet 1
! Type538-2:Outlet flow rate ->Flow rate at inlet 1
! Tee :Outlet temperature ->Temperature at inlet 2
! Tee :Outlet flow rate ->Flow rate at inlet 2
19,1 19,2 40,1 40,2
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02
*------------------------------------------------------------------------------
* Model "Type2b-2" (Type 2)
*
UNIT 37 TYPE 2
*$UNIT_NAME Type2b-2
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\for Temperatures\Solver 0 (Successive Substitution) Control Strategy\Type2b.tmf
*$POSITION 585 437
*$LAYER Main #
*$# NOTE: This control strategy can only be used with solver 0 (Successive substitution)
*$#
PARAMETERS 2
! 1 No. of oscillations
! 2 High limit cut-out
5.0000000000000000E+00 1.2000000000000000E+02
INPUTS 6
! Type538-5:Outlet temperature ->Upper input temperature Th
! Type38-2:Temperature to heat source ->Lower input temperature Tl
! [unconnected] Monitoring temperature Tin
! Type2b-2:Output control function ->Input control function
! [unconnected] Upper dead band dT
! [unconnected] Lower dead band dT
26,1 13,1 CONST 37,1 CONST
CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 2.0000000000000000E+01 2.0000000000000000E+01 0.0000000000000000E+00 8.0000000000000000E+00
2.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Type538-4" (Type 538)
*
UNIT 38 TYPE 538
*$UNIT_NAME Type538-4
*$MODEL .\Solar Library (TESS)\Evacuated Tube Solar Collector\Type538.tmf
*$POSITION 61 426
*$LAYER Main #
*$# This component sets the flow rate for all connected flow loop components if the variable speed option is enabled.
PARAMETERS 17
! 1 Collector array area
! 2 Number in series
! 3 Fluid specific heat
! 4 Capacitance of Collector
! 5 Number of Nodes
! 6 Initial Temperature
! 7 Tested flow rate per unit area
! 8 Fluid specific heat at test conditions
! 9 Collector test mode
! 10 Tested Intercept efficiency (a0)
! 11 Tested 1st order loss coefficient (a1)
! 12 Tested 2nd order loss coefficient (a2)
! 13 Logical unit for IAM data
! 14 Number of transverse angles
! 15 Number of longitudinal angles
! 16 Minimum array flowrate
! 17 Maximum array flow rate
2.0000000000000000E+00 1.0000000000000000E+00 4.1899999999999995E+00 1.0000000000000000E+01 1.0000000000000000E+02
2.0000000000000000E+01 5.0000000000000000E+01 4.1899999999999995E+00 1.0000000000000000E+00 7.0000000000000007E-01
1.0000000000000000E+00 1.0000000000000000E+00 8.7000000000000000E+01 1.0000000000000000E+01 1.0000000000000000E+01
0.0000000000000000E+00 1.0000000000000000E+04
INPUTS 13
! Type11f-5:Temperature at outlet 2 ->Inlet temperature
! Type11f-5:Flow rate at outlet 2 ->Array inlet flow rate
! Type109-TMY2:Ambient temperature ->Ambient temperature
! Type109-TMY2:beam radiation on tilted surface ->Beam radiation on the tilted surface
! Type109-TMY2:sky diffuse radiation on tilted surface ->Sky diffuse radiation on tilt
! Type109-TMY2:ground reflected diffuse radiation on tilted surface ->Ground diffuse radiation on tilt
! Type109-TMY2:slope of tilted surface ->Collector slope
! Type109-TMY2:angle of incidence for tilted surface ->Incidence angle
! [unconnected] Collector azimuth angle
! Type109-TMY2:solar zenith angle ->Solar zenith angle
! Type109-TMY2:solar azimuth angle ->Solar azimuth angle
! [unconnected] Pump Control Specification
! [unconnected] Outlet Temperature Setpoint
39,3 39,4 31,1 31,19 31,20
31,21 31,23 31,22 CONST 31,10
31,11 CONST CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 4.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 6.0000000000000000E+01
*** External files
ASSIGN C:\Trnsys17\Tess Models\SampleCatalogData\Bi-Axial IAMs\Iam_2d.dat 87
*|? Which file contains the IAM data for this collector? |1000
*------------------------------------------------------------------------------
* Model "Type11f-5" (Type 11)
*
UNIT 39 TYPE 11
*$UNIT_NAME Type11f-5
*$MODEL .\Hydronics\Flow Diverter\Other Fluids\Type11f.tmf
*$POSITION 230 489
*$LAYER Main #
PARAMETERS 1
! 1 Controlled flow diverter mode
2.0000000000000000E+00
INPUTS 3
! Type11f-4:Temperature at outlet 2 ->Inlet temperature
! Type11f-4:Flow rate at outlet 2 ->Inlet flow rate
! [unconnected] Control signal
35,3 35,4 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 5.0000000000000000E-01
*------------------------------------------------------------------------------
* Model "Tee " (Type 11)
*
UNIT 40 TYPE 11
*$UNIT_NAME Tee
*$MODEL .\Hydronics\Tee-Piece\Other Fluids\Type11h.tmf
*$POSITION 233 346
*$LAYER Main #
PARAMETERS 1
! 1 Tee piece mode
1.0000000000000000E+00
INPUTS 4
! Type538:Outlet temperature ->Temperature at inlet 1
! Type538:Outlet flow rate ->Flow rate at inlet 1
! Type538-4:Outlet temperature ->Temperature at inlet 2
! Type538-4:Outlet flow rate ->Flow rate at inlet 2
34,1 34,2 38,1 38,2
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02
*------------------------------------------------------------------------------
* EQUATIONS "Equa-2"
*
EQUATIONS 2
SF = ([47,1]-[47,2])/([47,1]+0.00001)
Tave = [47,3]/([47,4]+0.0001)
*$UNIT_NAME Equa-2
*$LAYER Main
*$POSITION 895 170
*------------------------------------------------------------------------------
* Model "Type24-3" (Type 24)
*
UNIT 47 TYPE 24
*$UNIT_NAME Type24-3
*$MODEL .\Utility\Integrators\Quantity Integrator\Type24.tmf
*$POSITION 958 255
*$LAYER Main #
PARAMETERS 2
! 1 Integration period
! 2 Relative or absolute start time
7.3000000000000000E+02 0.0000000000000000E+00
INPUTS 5
! Equa-5:Qh ->Qtotal-1
! Type6-2:Rate of energy delivery to fluid stream ->Qelectricity-2
! Equa-5:Q1 ->Qtotal-3
! Type6-2:Outlet fluid flow rate ->Qtotal-4
! [unconnected] Qtotal-5
QH 50,5 Q1 50,2 CONST
*** INITIAL INPUT VALUES
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Type25c-3" (Type 25)
*
UNIT 48 TYPE 25
*$UNIT_NAME Type25c-3
*$MODEL .\Output\Printer\Unformatted\No Units\Type25c.tmf
*$POSITION 774 148
*$LAYER Main #
PARAMETERS 10
! 1 Printing interval
! 2 Start time
! 3 Stop time
! 4 Logical unit
! 5 Units printing mode
! 6 Relative or absolute start time
! 7 Overwrite or Append
! 8 Print header
! 9 Delimiter
! 10 Print labels
7.3000000000000000E+02 4.8000000000000000E+03 5.0000000000000000E+03 8.6000000000000000E+01 0.0000000000000000E+00
0.0000000000000000E+00 -1.0000000000000000E+00 -1.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00
INPUTS 4
! Equa-2:SF ->Input to be printed-1
! Equa-2:Tave ->Input to be printed-2
! Type24-3:Result of integration-1 ->Input to be printed-3
! Type24-3:Result of integration-4 ->Input to be printed-4
SF TAVE 47,1 47,4
*** INITIAL INPUT VALUES
SF Temp Qt m
*** External files
ASSIGN f.out 86
*|? Output file for printed results |1000
*------------------------------------------------------------------------------
* EQUATIONS "Equa-5"
*
EQUATIONS 2
Q1 = [50,2]*[50,1]
Qh = [50,2]*4.19*([50,1]-17)
*$UNIT_NAME Equa-5
*$LAYER Main
*$POSITION 820 234
*------------------------------------------------------------------------------
* Model "Type6-2" (Type 6)
*
UNIT 50 TYPE 6
*$UNIT_NAME Type6-2
*$MODEL .\HVAC\Auxiliary Heaters\Type6.tmf
*$POSITION 931 383
*$LAYER Main #
PARAMETERS 4
! 1 Maximum heating rate
! 2 Specific heat of fluid
! 3 Overall loss coefficient for heater during operation
! 4 Efficiency of auxiliary heater
6.0000000000000000E+04 4.1899999999999995E+00 0.0000000000000000E+00 1.0000000000000000E+00
INPUTS 5
! Tee -2:Outlet temperature ->Inlet fluid temperature
! Tee -2:Outlet flow rate ->Fluid mass flow rate
! [unconnected] Control Function
! [unconnected] Set point temperature
! Type109-TMY2:Ambient temperature ->Temperature of surroundings
52,1 52,2 CONST CONST 31,1
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+00 4.0000000000000000E+01 2.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Type11b" (Type 11)
*
UNIT 51 TYPE 11
*$UNIT_NAME Type11b
*$MODEL .\Hydronics\Tempering Valve\Other Fluids\Type11b.tmf
*$POSITION 802 473
*$LAYER Main #
PARAMETERS 2
! 1 Tempering valve mode
! 2 Nb. of oscillations allowed
4.0000000000000000E+00 7.0000000000000000E+00
INPUTS 4
! M&T:T ->Inlet temperature
! M&T:Q ->Inlet flow rate
! Type38-2:Temperature to load ->Heat source temperature
! [unconnected] Set point temperature
T Q 13,3 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 5.0000000000000000E+01 4.0000000000000000E+01
*------------------------------------------------------------------------------
* Model "Tee -2" (Type 11)
*
UNIT 52 TYPE 11 -2
*$UNIT_NAME Tee -2
*$MODEL .\Hydronics\Tee-Piece\Other Fluids\Type11h.tmf
*$POSITION 845 357
*$LAYER Main #
PARAMETERS 1
! 1 Tee piece mode
1.0000000000000000E+00
INPUTS 4
! Type38-2:Temperature to load ->Temperature at inlet 1
! Type38-2:Flowrate to load ->Flow rate at inlet 1
! Type11b:Temperature at outlet 2 ->Temperature at inlet 2
! Type11b:Flow rate at outlet 2 ->Flow rate at inlet 2
13,3 13,4 51,3 51,4
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02
*------------------------------------------------------------------------------
END
TRANSIENT SIMULATION STARTING AT TIME = 4.8000000000000000E+03
STOPPING AT TIME = 5.0000000000000000E+03
TIMESTEP = 1 / 1
DIFFERENTIAL EQUATION ERROR TOLERANCE = 1.0000000000000002E-03
ALGEBRAIC CONVERGENCE TOLERANCE = 1.0000000000000002E-03
DIFFERENTIAL EQUATIONS SOLVED BY MODIFIED EULER
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 90 : TRNDll.dll is compiled in release mode. External DLLs will be loaded from the .\UserLib\ReleaseDLLs\ directory.
Reported information : Not available
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The following Types were loaded from TRNDll.dll: Type14, Type65, Type38, Type11, Type109, Type3, Type2, Type24, Type25, Type6
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "FileReader.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSArchiveDLL_v2.04_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSOptimizationLibrary_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The following Types were loaded from "TESSSolarLibrary_v17.01_Release.dll": Type538
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSStorageLibrary_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "type127.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type157_demo_release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type76Lib.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "type79-W.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type79Lib.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type82Lib.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 199 : TRNSYS found at least one user DLL in the UserLib directory. (Note: Only DLL's including Types that are used in the simulation are loaded)
Reported information : 1 user DLL was loaded after searching in "C:\Trnsys17\UserLib\ReleaseDLLs"
*** Warning at time : 4801.000000
Generated by Unit : 28
Generated by Type : 11
TRNSYS Message 33 : An inconsistent connection has been defined in the TRNSYS input file. The desired units for the input do not match the units of the connected output as specified in the component model. The discrepancy is listed below.
Reported information : Unit 25 Type 538 Output 2 (variable type TE1) is connected to Unit 28 Type 11 input 4 (variable type MF1).
Unit / Type / Output / Var.Type Connected to Unit / Type / Input / Var.Type
-----------------------------------------------------------------------------
25 538 2 TE1 -----------> 28 11 4 MF1
*** Warning at time : 4801.000000
Generated by Unit : 30
Generated by Type : 11
TRNSYS Message 33 : An inconsistent connection has been defined in the TRNSYS input file. The desired units for the input do not match the units of the connected output as specified in the component model. The discrepancy is listed below.
Reported information : Unit 26 Type 538 Output 2 (variable type TE1) is connected to Unit 30 Type 11 input 4 (variable type MF1).
Unit / Type / Output / Var.Type Connected to Unit / Type / Input / Var.Type
-----------------------------------------------------------------------------
26 538 2 TE1 -----------> 30 11 4 MF1
*** Warning at time : 4801.000000
Generated by Unit : 36
Generated by Type : 11
TRNSYS Message 33 : An inconsistent connection has been defined in the TRNSYS input file. The desired units for the input do not match the units of the connected output as specified in the component model. The discrepancy is listed below.
Reported information : Unit 19 Type 538 Output 2 (variable type TE1) is connected to Unit 36 Type 11 input 2 (variable type MF1).
Unit / Type / Output / Var.Type Connected to Unit / Type / Input / Var.Type
-----------------------------------------------------------------------------
19 538 2 TE1 -----------> 36 11 2 MF1
*** Warning at time : 4801.000000
Generated by Unit : 40
Generated by Type : 11
TRNSYS Message 33 : An inconsistent connection has been defined in the TRNSYS input file. The desired units for the input do not match the units of the connected output as specified in the component model. The discrepancy is listed below.
Reported information : Unit 34 Type 538 Output 2 (variable type TE1) is connected to Unit 40 Type 11 input 2 (variable type MF1).
Unit / Type / Output / Var.Type Connected to Unit / Type / Input / Var.Type
-----------------------------------------------------------------------------
34 538 2 TE1 -----------> 40 11 2 MF1
*** Warning at time : 4801.000000
Generated by Unit : 40
Generated by Type : 11
TRNSYS Message 33 : An inconsistent connection has been defined in the TRNSYS input file. The desired units for the input do not match the units of the connected output as specified in the component model. The discrepancy is listed below.
Reported information : Unit 38 Type 538 Output 2 (variable type TE1) is connected to Unit 40 Type 11 input 4 (variable type MF1).
Unit / Type / Output / Var.Type Connected to Unit / Type / Input / Var.Type
-----------------------------------------------------------------------------
38 538 2 TE1 -----------> 40 11 4 MF1
*** The TRNSYS components will be called in the following order:
Unit # 9 Type # 14
Unit # 13 Type # 38
Unit # 19 Type # 538
Unit # 25 Type # 538
Unit # 26 Type # 538
Unit # 27 Type # 11
Unit # 28 Type # 11
Unit # 29 Type # 11
Unit # 30 Type # 11
Unit # 31 Type # 109
Unit # 33 Type # 3
Unit # 34 Type # 538
Unit # 35 Type # 11
Unit # 36 Type # 11
Unit # 37 Type # 2
Unit # 38 Type # 538
Unit # 39 Type # 11
Unit # 40 Type # 11
Unit # 50 Type # 6
Unit # 51 Type # 11
Unit # 52 Type # 11
Unit # 47 Type # 24
Unit # 11 Type # 65
Unit # 48 Type # 25
==========================================================================================
TYPE109 TIME REPORT: (for debugging purpose)
------------------------------------------------------------------------------------------
time_report_unit: 6
time_filter: .5000E+07 [ms]
==========================================================================================
Level0 Level1 Level2 Level3 Level4 Counter DTime[ms] TTime[ms]
==========================================================================================
zwischenzeit 1 : 0.000000000000000E+000
zwischenzeit 2 : 0.000000000000000E+000
zwischenzeit 3 : 0.000000000000000E+000
zwischenzeit 4 : 0.000000000000000E+000
zwischenzeit 5 : 0.000000000000000E+000
zwischenzeit 6 : 0.000000000000000E+000
zwischenzeit 7 : 0.000000000000000E+000
zwischenzeit 8 : 0.000000000000000E+000
zwischenzeit 9 : 0.000000000000000E+000
zwischenzeit 10 : 0.000000000000000E+000
itest : 672
Summe : 0.000000000000000E+000
*** Warning at time : 4934.000000
Generated by Unit : 37
Generated by Type : 2
Message : The controller was stuck during 21 percent of the simulation timesteps.
*********************************************************************************************************
The Following UNIT Numbers, TYPE Numbers, and Logical Units Were Used in the Supplied TRNSYS Input File:
9 2 4
11 3 6
13 6 9
19 11 86
25 14 87
26 24 88
27 25 89
28 38 90
29 65 91
30 109 92
31 538
33
34
35
36
37
38
39
40
47
48
50
51
52
*********************************************************************************************************
Total TRNSYS Calculation Time: 4.3000 Seconds
-------------- next part --------------
10 10 1 0 0 0 0 0 0 0 0 0
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
0.00000000000000E+0000
5 0.00000000000000E+0000 6.00000000000000E+0001
5 0.00000000000000E+0000 3.00000000000000E+0003
0 0.00000000000000E+0000 0.00000000000000E+0000
0 0.00000000000000E+0000 0.00000000000000E+0000
0 0.00000000000000E+0000 0.00000000000000E+0000
0 0.00000000000000E+0000 0.00000000000000E+0000
0 0.00000000000000E+0000 0.00000000000000E+0000
0 0.00000000000000E+0000 0.00000000000000E+0000
0 0.00000000000000E+0000 0.00000000000000E+0000
0 0.00000000000000E+0000 0.00000000000000E+0000
0 0.00000000000000E+0000 0.00000000000000E+0000
0 0.00000000000000E+0000 0.00000000000000E+0000
0 0.00000000000000E+0000 0.00000000000000E+0000
0 0.00000000000000E+0000 0.00000000000000E+0000
0 0.00000000000000E+0000 0.00000000000000E+0000
0 0.00000000000000E+0000 0.00000000000000E+0000
0 0.00000000000000E+0000 0.00000000000000E+0000
0 0.00000000000000E+0000 0.00000000000000E+0000
0 0.00000000000000E+0000 0.00000000000000E+0000
0 0.00000000000000E+0000 0.00000000000000E+0000
-99
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Factoryx.tpf
Type: application/octet-stream
Size: 542095 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110914/ec56beb8/attachment-0017.obj>