[TRNSYS-users] Help with compiling new type on trnsys 16

[Baboo Gowreesunker]

Hi Kordou

I create my components as follows:


1.       Create a Proforma in TRNSYS, by specifying the Type number you want your component to have.

2.       Usually compile the Fortran Code in Release mode (Depends on which mode your TRNSYS.dll was compiled), and send to ...\UserLib\ReleaseDLLs    (or Debug, depending on which mode you compiled the code)

3.       Simply open your Proforma in TRNSYS studio, and when you run the simulation, TRNSYS will automatically search this folder when you start your simulation

You should create your Proforma. TRNSYS will not automatically create one for you.

Hope this helps
Lesh

From: kordou [mailto:kordou at gmail.com]
Sent: 12 September 2011 19:48
To: trnsys-users at cae.wisc.edu
Subject: [TRNSYS-users] Help with compiling new type on trnsys 16

Hi

I'm trying to add a new type of my phd thesis on trnsys. I am using the fortran cvf compiler and I have followed the programmers guide. After the compiling  I can see the debug and the release dll files on my trnsys directory.

My question is how can I see my type on simulation studio, because I cannot see any new type. Do I have to compile and the trnsys  ?

Regards
Kordou

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110913/24f43747/attachment-0005.htm>