[TRNSYS-users] Parallel Simulation with Type155

[Hermann Schranzhofer]

Dear TRNSYS User,
 
we found out that it is not possible to start more than one simulation in parallel (using e.g. a multicore processor) if there is a Type155 (MatLab connection) used in the simulation. It seems that the MatLab Workspace is using the same Memoryspace and so the simulation breaks down if a second one is started.
Is someone out there who can help me with this problem?
 
Best regards,
Hermann Schranzhofer.
 

_______________________________________________________________

DI Dr. mont. Hermann Schranzhofer
Institut fuer Waermetechnik / Institute of Thermal Engineering
TU Graz / Graz University of Technology
Inffeldgasse 25 / B, A-8010 Graz

Tel.: +43 316 873 7314
mobil: +43 664 60 873 7314
Fax : +43 316 873 7305
http://www.iwt.tugraz.at/
_______________________________________________________________



 

________________________________

Von: trnsys-users-bounces at cae.wisc.edu [mailto:trnsys-users-bounces at cae.wisc.edu] Im Auftrag von David BRADLEY
Gesendet: Montag, 12. September 2011 17:37
An: R.K. Singh
Cc: trnsys-users at cae.wisc.edu
Betreff: Re: [TRNSYS-users] Error 50


Dear Ramkishore,
 Increasing the number of surfaces that Type15 calculates adds a lot of parameters to your simulation. So many, in this case that your simulation exceeds the total number of parameters allowed per simulation. In addition to your change in Type15.f90, you also need to change TrnsysConstants.f90 as follows:

Integer, Parameter :: nMaxParameters      =     4000  ! Maximum number of Parameters                                2000

in other words, increase the total number of allowed parameters, then recompile the TRNDll.dll.
Kind regards,
 David



On 9/9/2011 04:57, R.K. Singh wrote: 

	Dear All,
	I am using type 15-6 and type 56 components for simulating a spherical building that is defined by 144 surfaces. I have connected successfully all requiered connection between two. One error 50 arrive at the time of running the model. Though, I have changed the ns_max=200 from 25 in Type 15.f90 [Parameter (ns_max=25,nitems_max=36,nout=52+8*ns_max)] file. The screen shot is attached herewith for your kind reference.
	 
	I would be very thankful if anybody can help to resolve this problem.
	 
	Regards,
	Ramkishore Singh
	Department of Energy & Environment
	TERI University
	Web: www.teriuniversity.ac.in
	
	
	
	

	 
	
	_______________________________________________
	TRNSYS-users mailing list
	TRNSYS-users at cae.wisc.edu
	https://mailman.cae.wisc.edu/listinfo/trnsys-users


--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110913/7c79db18/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Hermann Schranzhofer.vcf
Type: application/octet-stream
Size: 245 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110913/7c79db18/attachment-0005.obj>