[TRNSYS-users] Any Idea about the GenOpt error - "The program couldnot find all the files. Please check your directory settings"

[Timothy McDowell]

Richard -That error means that TrnOpt had an error writing one of the many files that GenOpt uses to run the optimization.  Check that you do not have one of the files open in a different program when you try to run the optimization.Regards,Tim   ---------------------------------- Timothy McDowell Executive Vice President Thermal Energy System Specialists, LLC 22 N. Carroll St, Suite 370 Madison, WI 53703 Phone: 608-274-2577 Fax: 608-278-1475    ----- Original Message -----From: "Richard Hall" >;r.hall at steel-sci.com 
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110902/e6fc8af0/attachment-0005.htm>